-
Vendor:Holley
Holley RED® 97 GPH Electric Fuel Pump 97 GPH, 7 psi Max — Tumble-Polished Billet, Low 2A Draw
Holley 12-801-1 RED® Electric Fuel Pump is a compact, high-flow 97 GPH electric fuel pump engineered for reliable street and strip performance. Built on Holley’s long-standing rotor-and-vane architecture, this RED® fuel pump combines durable construction with steady, pulse-free delivery for carbureted and EFI-adapted builds...- $463.48
- $463.48
- Unit price
- per
-
Vendor:A-Premium
A-Premium Electric Fuel Pump Module Assembly for Toyota Corolla/Matrix & Pontiac Vibe — Direct-Fit 2009–2018, Complete Pump/Sender
The A-Premium Electric Fuel Pump Module Assembly is a direct-fit replacement fuel pump unit designed to restore reliable fuel delivery for compatible Toyota Corolla, Pontiac Vibe and Matrix models. When your vehicle needs a dependable fuel delivery solution, this A-Premium module provides a complete...- $175.62
- $175.62
- Unit price
- per
-
Vendor:JkorkM
JkorkM Fuel Line Kit for Chevy Silverado & GMC Sierra 1999-2003 — Braided PTFE Hoses Complete Replacement
JkorkM 819-840 is a complete braided stainless steel fuel line kit designed to replace worn OEM lines on 1999–2003 Chevy Silverado and GMC Sierra trucks. This fuel line set supplies flexible, PTFE-lined hoses wrapped in corrosion-resistant stainless braid and includes all clamps and a...- $217.35
- $217.35
- Unit price
- per
-
Vendor:THUNDERMINGO
THUNDERMINGO Rochester Quadrajet 4-Barrel Carburetor 1904R/1906R 750 CFM Electric Choke Vacuum-Secondary Fit Chevy 305/350
THUNDERMINGO's new 4-barrel replacement carburetor is a direct-fit Rochester Quadrajet-style unit (1904R/1906R pattern) with electric choke, sized around 750 CFM for Chevy 305–350 V8 engines from 1980–1989. This THUNDERMINGO carburetor is built to replace worn or damaged Rochester Quadrajet 1904R/1906R 4MV units on compatible...- $418.72
- $418.72
- Unit price
- per
-
Vendor:Aeromotive
Aeromotive EFI Fuel Pressure Regulator Adjustable 40–75 PSI — Boost‑Referenced, High‑Flow Compact Design
Aeromotive's 13129 adjustable EFI fuel pressure regulator precisely controls 40–75 PSI in return-style fuel systems for reliable, tunable fuel delivery. This compact, boost-referenced regulator is built for high-performance EFI applications where consistent fuel pressure and clean hose routing matter. Machined and tested using aerospace-inspired...- $419.74
- $419.74
- Unit price
- per
-
Vendor:IXGKHC
IXGKHC Fuel Injectors for Chevy Silverado GMC Sierra Yukon — 8-Piece Direct-Fit Set 2014–2018, Stainless Calibration
These eight IXGKHC direct-fit fuel injectors replace factory units on compatible 2014–2018 Chevy and GMC V8/V6 engines to restore smooth fueling and dependable throttle response. If your Silverado, Sierra, Tahoe, Suburban or Yukon has rough idling, uneven acceleration, or increased fuel use, worn injectors...- $244.98
- $244.98
- Unit price
- per
-
Vendor:Delphi
Delphi Fuel Pump Module Assembly FG1057 — Direct-Fit OE Replacement, Low-Amperage Design
The Delphi FG1057 Fuel Pump Module Assembly is a direct-fit replacement fuel delivery unit engineered to deliver reliable pumping, accurate fuel-level readings, and long-lasting operation to match original equipment standards. Delphi's FG1057 is built using the same engineering principles and manufacturing controls used for...- $515.76
- $515.76
- Unit price
- per
-
Vendor:A-Premium
A-Premium 2-Barrel Carburetor 2100/A800 Replacement for Classic Ford, Jeep & Mercury — Direct-Fit, Restores Idle & Throttle Respon
The A-Premium 2-barrel carburetor (2100 / A800) is a direct-fit replacement that restores reliable air-fuel metering for classic Ford, Jeep Wagoneer and Mercury engines. If your vintage truck or muscle car is running rough, idling poorly, or struggling to deliver smooth throttle response, a...- $198.57
- $198.57
- Unit price
- per
-
Vendor:Swift-Run
Swift-Run Fuel Pump Assembly for Chevy Silverado 1500 (2007–2008 V8) — Direct-fit, Pressure-Tested
Swift-Run's electric fuel pump assembly is a direct-fit replacement engineered for Chevy Silverado 1500 (2007–2008) V8 engines and compatible GMC Sierra 1500 models, restoring reliable in-tank fuel delivery and sensor integration. If your Silverado or Sierra is experiencing fuel delivery hesitation, low pressure, or...- $186.05
- $186.05
- Unit price
- per
-
Vendor:GELUOXI
GELUOXI V8 Throttle Body Assembly 12679525 — Direct-Fit for Chevy/GMC 2003–2007, Restores Smooth Throttle
GELUOXI 12679525 is a direct-fit throttle body assembly built to replace worn or faulty OEM units on a range of V8 Chevy, GMC, Cadillac and related models. This replacement throttle body is engineered to restore smooth throttle response and maintain correct airflow readings for...- $171.47
- $171.47
- Unit price
- per
-
Vendor:Generic
Generic 650 CFM 4‑Barrel Carburetor 4150 Square‑Bore BR‑67199 — Mechanical Secondary, Dual Inlet
High‑flow 650 CFM 4‑barrel carburetor built as a direct replacement for 4150 square‑bore mechanical‑secondary setups. This BR‑67199 carburetor is a performance‑oriented replacement designed for racers and hot‑rod builders who need a dependable, high‑flow 4150‑style carb with mechanical secondaries and dual fuel inlets. Machined from...- $376.76
- $376.76
- Unit price
- per
-
Vendor:THUNDERMINGO
THUNDERMINGO 2-Barrel 32/36 Carburetor Kit with Air Filter — Direct-Replacement, Pre-Assembled for Weber DGV/DGEV
THUNDERMINGO’s 2-barrel 32/36 carburetor with air filter assembly is a direct-replacement, fully tested carb kit designed to fit Weber-style DGV/DGEV/DGAV 32/36 applications on a wide range of classic Toyotas, Nissans, Mazdas, Datsuns and Jeeps. This complete carburetor assembly arrives assembled and checked, ready to...- $288.00
- $288.00
- Unit price
- per
-
Vendor:Edelbrock
Edelbrock AVS2 650 Series Calibration Kit for 1905 & 1906 Superchargers — shims & hardware for precise valve setup
The Edelbrock Calibration Kit for AVS2 650 Series (1905 & 1906) is a purpose-built set of tools and components that lets you accurately tune and calibrate your supercharger’s air valve system for reliable performance. This calibration kit was created for owners and technicians working...- $193.33
- $193.33
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 6AN Adjustable EFI Fuel Pressure Regulator — Black, 20–75PSI or 75–120PSI Range, Includes Gauge & Fittings
The EVIL ENERGY 6AN adjustable bypass fuel pressure regulator lets you precisely control EFI fuel pressure between 20–75 PSI (stock spring) or 75–120 PSI (replacement spring) for gasoline and alcohol blends. This compact, black aluminum regulator is built for aftermarket EFI systems that use...- $179.79
- $179.79
- Unit price
- per
-
Vendor:ATRACYPART
ATRACYPART 6.7L Cummins Fuel Filter 6-Pack FF63009 / FF63054NN — 10‑Micron, Corrosion‑Resistant
ATRACYPART FF63009 / FF63054NN is a direct-fit 10-micron fuel filter designed to protect 6.7L Cummins B- and L-series diesel engines by removing contaminants and ensuring consistent fuel flow. Designed as an exact-replacement fuel filter for a wide range of industrial and on-highway applications, this...- $200.66
- $200.66
- Unit price
- per
-
Vendor:Generic
Generic 650 CFM 4150 4‑Barrel Carburetor BR-67255 — 1-11/16in Bore, Mechanical Secondary & Electric Choke
The BR-67255 is a 4150-pattern 4-barrel, 650 CFM replacement carburetor built for mechanical-secondary, double-pumper setups with an electric choke for dependable starting and tuning flexibility. This high-flow 650 CFM carburetor is designed as a direct-fit style replacement for applications using a 4150 square bore...- $351.99
- $351.99
- Unit price
- per
-
Vendor:caqeg
caqeg 110V AC 550W Self-Priming Transfer Pump — 60 L/min Diesel/Kerosene, Waterproof Switch
caqeg's 110V AC 550W self-priming transfer pump quickly and safely moves diesel and kerosene at up to 60 L/min for vehicles, generators, and equipment. This electric transfer pump is built for fast, repeatable refueling and fluid movement where portability and power matter. With a...- $248.63
- $248.63
- Unit price
- per
-
Vendor:Farpida
Farpida Fuel Pump Module Assembly Fit Polaris Ranger 500/700 2006–2013 — Direct Replacement with Sender
Farpida 2520674 is a direct-replacement fuel pump module and sending unit engineered to restore reliable fuel delivery for compatible Polaris Ranger models from 2006–2013. If your Polaris Ranger is experiencing sputtering, hard starts, or erratic fuel gauge readings, a worn pump or faulty sender...- $196.30
- $196.30
- Unit price
- per
-
Vendor:oktiger
oktiger Fuel Injector Kit for GM 4.8L/5.3L/6.0L V8 – 8-Piece OEM-Style Injectors with Preinstalled O-Rings
Oktiger 8-piece fuel injector set is a direct OEM-replacement solution engineered for GM 4.8L/5.3L/6.0L V8 engines from 1999–2007 to restore consistent fuel delivery and drivability. This eight-pack of fuel injectors fits a broad range of Chevrolet, GMC, Cadillac, Buick, Isuzu, Hummer and commercial models...- $167.27
- $167.27
- Unit price
- per
-
Vendor:A ABIGAIL
A ABIGAIL Fuel Pump Assembly for Nissan Sentra L4 1.8L (2013–2019) — Complete Module with Sending Unit, Direct-Fit Replacement
A ABIGAIL fuel pump assembly is a direct-fit replacement that restores reliable fuel delivery for Nissan Sentra 2013–2019 with the L4 1.8L engine. If your Sentra is showing signs of weak acceleration, hesitation, or hard starts, a worn or failing fuel pump is a...- $221.52
- $221.52
- Unit price
- per
-
Vendor:Dorman
Dorman Nylon Fuel Line Repair Kit 104-Piece Universal Set — Barbed Fittings & Clamp Tool
The Dorman 800-300 Nylon Fuel Line Repair Kit is a 104-piece universal repair set that provides the fittings, clamps, and tools needed to splice, replace, and restore nylon fuel lines quickly and reliably. If a short section of nylon fuel line is cracked, clogged,...- $575.79
- $575.79
- Unit price
- per
-
Vendor:TREXFLOW TF
TREXFLOW TF P4070 12V Electric Fuel Pump 4–6 psi Pre-assembled Rotary Vane with Bracket and Reinforced Wiring
The TREXFLOW TF P4070 is a pre-assembled 12V rotary-vane electric fuel pump delivering 4–6 psi and up to 72 GPH for external in-line automotive carburetor systems. This compact, ready-to-install assembly combines a P4070-style rotary vane pump with a metal mounting bracket and strengthened terminal...- $187.95
- $187.95
- Unit price
- per
-
Vendor:THUNDERMINGO
THUNDERMINGO Carter YF Single-Barrel Carburetor D5TZ9510AG Replacement for 1975–1982 Ford 240/250/300 6-Cyl, Rebuilt Direct-Fit
THUNDERMINGO D5TZ9510AG is a direct-replacement Carter YF single-barrel carburetor engineered to fit 1975–1982 Ford 240, 250 and 300 6-cylinder engines and compatible vintage Jeep/old Ford applications. This rebuilt, ready-to-install carburetor reproduces the Carter YF Type 1-barrel layout and replaces factory numbers such as D5TZ9510AG,...- $174.60
- $174.60
- Unit price
- per
-
Vendor:E-cowlboy
E-cowlboy High-Pressure Oil Pump Master Service Kit for Ford 7.3L Powerstroke (1999–2003) — 38-Pc Rebuild Kit with Reinforced Hose
Complete 38-piece high-pressure oil pump (HPOP) master service kit with heavy-duty hoses and crossover lines engineered to restore leak-free, even oil pressure on 1999–2003 Ford 7.3L Powerstroke engines. This all-in-one package from E-cowlboy combines a full HPOP seal and hardware service kit with reinforced...- $175.62
- $175.62
- Unit price
- per
-
Vendor:VEVOR
VEVOR Diesel Injector Tester 400Bar/6000PSI — Cast-iron Bench Kit with Dual-Scale Gauge & 0.8L Filtered Cup
VEVOR's 400Bar (6000PSI) diesel fuel injector tester is a cast-iron, bench-style kit built to measure and adjust injector nozzle opening and pop pressures, inspect spray patterns, and diagnose leakage and chattering on most mechanical diesel injectors. The VEVOR diesel injector tester is a portable...- $233.85
- $233.85
- Unit price
- per
-
Vendor:Revolution Electronics
Revolution Electronics Electric Fuel Pump Controller — 12V compact unit with 3s prime and 7A resettable fuse
Revolution Electronics Electric Fuel Pump Controller briefly powers your pump to prime carburetor bowls on key‑on and then runs the pump only while the engine produces a tach signal. When converting a classic car or truck from a mechanical fuel pump to an electric...- $180.82
- $180.82
- Unit price
- per
-
Vendor:JDMON
JDMON Fuel Injectors for Chevy/GMC 5.3L & 4.3L (Pack of 8) — OE-Fit, Stainless Calibration
JDMON replacement fuel injectors (pack of 8) are direct-fit units engineered to restore fuel delivery on 5.3L/4.3L GM V8/V6 trucks and SUVs from 2014–2018. These injectors are built to match OE fit and flow for Chevrolet Silverado, Tahoe, Suburban, Cheyenne and GMC Sierra/Yukon models...- $284.12
- $284.12
- Unit price
- per
-
Vendor:K&N
K&N Air Oil Separator for 2011–2023 Ford F-150 & 2017–2023 Raptor — High-Capacity, Tool-Free Drain
K&N's 81-0800 Air Oil Separator captures crankcase oil and contaminants before they reach the intake, protecting engine performance and components. The K&N Air Oil Separator (81-0800) is a vehicle-specific catch can designed for Ford trucks and SUVs to reduce oil and blowby vapors entering...- $328.79
- $328.79
- Unit price
- per
-
Vendor:A ABIGAIL
A ABIGAIL Fuel Pump E7115MN Replacement for Jeep TJ/Wrangler 1997–2002 — 19‑Gallon Tank, Direct-Fit with Sending Unit
A ABIGAIL Fuel Pump E7115MN is a direct-fit replacement fuel pump module designed to restore consistent fuel delivery for Jeep TJ/Wrangler 1997–2002 models with the 19‑gallon tank. This replacement assembly includes the pump module and sending unit built to match OE fit and function...- $190.23
- $190.23
- Unit price
- per
-
Vendor:PRUNkuar
PRUNkuar 12V Fuel Transfer Pump — 20 GPM High‑Flow DC Diesel Pump with Manual Nozzle and Inline Filter
PRUNkuar’s 12V Fuel Transfer Pump is a heavy‑duty, 20 GPM DC pump with manual nozzle and built‑in filter designed for fast, mobile transfer of gasoline, diesel, kerosene, E15 and biodiesel up to B20. This compact, vehicle‑powered pump combines a high flow rate with explosion‑resistant...- $611.70
- $611.70
- Unit price
- per
-
Vendor:Aumzong
Aumzong Electric Fuel Pump Module for Hyundai Sonata / Kia Optima 31110-D5500 with Sending Unit, Direct Fit
The Aumzong 31110-D5500 is a direct-replacement electric fuel pump module engineered to restore fuel delivery and pressure for compatible Hyundai Sonata and Kia Optima models. If your vehicle is experiencing hard starts, inconsistent idling, or reduced fuel delivery, replacing the in-tank fuel pump module...- $271.60
- $271.60
- Unit price
- per
-
Vendor:Facet
Facet 12V Posi‑Flo Low‑Pressure Fuel Pump Kit FEP304SV — 1–2 psi, 1/8" NPT Ports, includes filter & adapter
The Facet FEP304SV Posi-Flo is a compact 12‑volt low‑pressure fuel pump kit designed to supply carbureted engines up to about 100 hp with steady, low‑amp fuel delivery (1–2 psi maximum). This complete kit centers on Facet's Posi‑Flo technology: a quiet composite‑chassis pump that draws...- $175.54
- $175.54
- Unit price
- per
-
Vendor:Walbro
Walbro GSL In-Line Electric Fuel Pump 255 LPH — 10 mm x 1.00 Female Inlet/Outlet, Gasoline
Walbro GSL in-line electric fuel pump delivering 255 liters per hour with 10 mm x 1.00 female inlet and outlet for gasoline applications. This in-line Walbro GSL fuel pump supplies a reliable flow rate for many EFI systems and performance upgrades. Manufactured under TI...- $214.24
- $214.24
- Unit price
- per
-
Vendor:DEFIPRO
DEFIPRO Fuel Pump Assembly for Polaris Ranger Crew XP 1000 — 11.6in Direct-Fit Complete Module
DEFIPRO 2208123 is a direct-fit electric fuel pump assembly engineered to replace the original pump in Polaris Ranger and PRO XD Full Size Gas models listed for 2018–2024. If your Polaris Ranger Crew XP 1000, Ranger XP 1000, or PRO XD Full Size Gas...- $196.48
- $196.48
- Unit price
- per
-
Vendor:ACmango
ACmango Carter 1-Barrel Carburetor Replacement for Ford 200/250/300ci (D5TZ9510AG) — Direct-Fit, Tuned Choke
This ACmango Carter 1-barrel carburetor is a direct-fit aftermarket replacement for Carter YF/YFA units (D5TZ9510AG) used on 1965–1985 Ford 200/250/300 cu in engines. Designed as an affordable, ready-to-install alternative to original Carter assemblies, this 1-barrel carburetor supports Ford inline-six engines (200, 250, 300 cubic...- $201.37
- $201.37
- Unit price
- per
-
Vendor:YZHIDIANF
YZHIDIANF Fuel Injectors for Jeep Wrangler 3.8L / 3.3L — 0280158119 Direct-Fit, OE-Style with Stainless Internals
YZHIDIANF 0280158119 fuel injectors are direct-fit replacement injectors engineered to restore consistent fuel delivery for Jeep Wrangler 3.8L and several Chrysler/Dodge V6 models. These fuel injectors are built to OE-style specifications and come with stainless steel internal components, high-performance O-rings and exhaustive bench testing...- $163.10
- $163.10
- Unit price
- per
-
Vendor:Holley
Holley Main Jet Assortment Kit 64–99 (2 ea) in Plastic Case — Carburetor Tuning & Quick Swap
Holley 36-181 Jet Assortment Kit is a complete, organized set of main jets (sizes 64–99) in a durable plastic case for quick carburetor calibration and tuning. If you work on carburetors for street, race or marine engines, a broad selection of main jets in...- $233.96
- $233.96
- Unit price
- per
-
Vendor:THUNDERMINGO
THUNDERMINGO Single-Barrel Carburetor for Ford 144/170/200/223 Engines — Manual Choke, Direct-Fit Replacement
THUNDERMINGO's single-barrel carburetor is a direct-fit replacement for select Ford inline 6 and 4-cylinder engines from the late 1950s to mid-1960s, featuring a manual choke and precision-machined dimensions for reliable refitting. This carburetor is built as a practical replacement for worn or damaged original...- $202.77
- $202.77
- Unit price
- per
-
Vendor:Calenon
Calenon Fuel Transfer Pump 110V 1/2 HP, 18 GPM — Cast-Iron Head & Self-Priming
The CALENON 110V Oil Transfer Pump is a plug-in, self-priming electric fuel pump that delivers up to 18 GPM for diesel, kerosene, biodiesel, and light fuel oils. This compact, workshop-ready pump pairs a 1/2 HP copper-wound motor with a cast-iron pump head to move...- $252.82
- $252.82
- Unit price
- per
-
Vendor:FMCNMech
FMCNMech 8 GPM 110V Electric Oil Transfer Pump Kit — Cast-Iron, Drum-Mountable & Portable
FMCNMech 8 GPM 110V Electric Oil Transfer Pump Kit is a portable, drum-mountable 110V pump engineered to move diesel and medium-viscosity oils at up to 8 gallons per minute with a durable cast-iron body. This pump kit combines a 110V AC motor, a cast-iron...- $338.35
- $338.35
- Unit price
- per
-
Vendor:ZJTBLL
ZJTBLL 4-Barrel Carburetor Rochester Quadrajet Direct-Fit 750 CFM Aluminum Replacement for Chevy/GMC V8s
A direct-fit, aluminum 4-barrel replacement carburetor engineered to restore throttle response and fuel delivery for Rochester Quadrajet-equipped V8 engines. This ZJTBLL 4-barrel carburetor is a new replacement designed to match the Rochester Quadrajet 1901R / 1901-GG family used on Chevy and GMC V8s from...- $304.98
- $304.98
- Unit price
- per
-
Vendor:Briggs & Stratton
Briggs & Stratton carburetor 594593 OEM replacement for small engines, restores starting and steady idle
The Briggs & Stratton 594593 Carburetor is an OEM replacement unit that restores proper fuel-and-air delivery so your small engine runs smoothly. This genuine Briggs & Stratton carburetor is built to the manufacturer's specifications to ensure correct fitment and consistent fuel metering for compatible...- $254.62
- $254.62
- Unit price
- per
-
Vendor:THUNDERMINGO
THUNDERMINGO Rochester 2GC 2‑Barrel Carburetor for Chevy 350/400 Large‑Base with Electric Choke
THUNDERMINGO's Rochester 2GC is a direct-replacement two-barrel carburetor engineered to fit Chevy small-block 350 (5.7L) and 400 (6.6L) engines from the 1970s with the large-base flange. This carburetor is built as a bolt-on alternative for classic Chevrolet vehicles that originally used Rochester 2GC-style units....- $203.81
- $203.81
- Unit price
- per
-
Vendor:Facet
Facet Cube 12V Fuel Pump Kit FEP289SV (1/8 NPT) — 32 GPH, 4–7 psi low-pressure
Facet FEP289SV is a compact 12‑volt solid‑state low‑pressure fuel pump kit designed to deliver up to 32 gallons per hour with a controlled 4–7 psi maximum pressure for moderate engine fuel systems. This complete Facet Cube pump kit is built for light to medium...- $204.52
- $204.52
- Unit price
- per
-
Vendor:RADHLBNIU
RADHLBNIU 12V Electric Fuel Pump 140 GPH — 3/8" NPT Inlet/Outlet, ~14 PSI Preset
The RADHLBNIU 140 GPH electric fuel pump delivers a compact, 12V solution with 3/8" NPT inlet and outlet ports, factory-set to roughly 14 PSI for reliable fuel transfer. This compact inline pump is built to move up to 140 gallons per hour while drawing...- $173.53
- $173.53
- Unit price
- per
-
Vendor:NENKUTEN
NENKUTEN 2-Barrel Carburetor 2100/2150 A800 for Ford 289-351 & Jeep 360 — Electric Choke, Gasket Kit
The NENKUTEN 2-Barrel Carburetor 2100/2150 A800 is a direct-fit aftermarket replacement for classic Ford and Jeep small-block engines, supplied with a mounting gasket and necessary hardware for installation. Built as a heavy-duty aftermarket substitute for Motorcraft/Autolite 2100 and 2150 units, this carburetor is designed...- $202.54
- $202.54
- Unit price
- per
-
Vendor:Fleetguard
Fleetguard Fuel Water Separator FS20089 — OEM-spec diesel filter, water and particulate protection
The Fleetguard FS20089 is a high-durability fuel water separator engineered to remove water and particulates from diesel fuel, protecting injectors and fuel systems. The FS20089 is an OEM-spec fuel water separator designed for commercial diesel engines and heavy equipment. Built to Fleetguard quality standards,...- $167.27
- $167.27
- Unit price
- per
-
Vendor:Facet
Facet Dura-Lift 12V Fuel Pump 40285 — 1/8 NPT, 4–7 psi, 120" Vertical Lift, 33 GPH
Facet Dura-Lift 40285 is a compact 12V electric fuel pump engineered to pull fuel from up to 120 inches below the unit while delivering 4–7 psi and up to 33 GPH free flow. This Dura-Lift pump is built for installations where the supply tank...- $329.65
- $329.65
- Unit price
- per
-
Vendor:GSTP
GSTP High-Pressure Fuel Pump EP1028 — Direct-Fit 2.4L GM Replacement, Stainless Housing, 36 GPH
The GSTP EP1028 is a direct-fit high-pressure fuel pump engineered to restore correct fuel delivery for select 2.4L GM engines from 2010–2017. If your 2.4L GM vehicle is showing signs of fuel delivery issues, the GSTP EP1028 replacement pump is built to match original-equipment...- $219.44
- $219.44
- Unit price
- per
-
Vendor:Motorcraft
Motorcraft 7.3L Power Stroke Injector O-Ring Kit (Set of 8) — OEM-fit, High-Temp Fuel-Resistant Seals
Motorcraft CM-5010 is an OEM-quality set of eight replacement O-ring seals engineered to restore reliable sealing on 7.3L diesel fuel injectors. These O-rings are manufactured to Motorcraft's original-equipment specifications and are tested to resist fuel, heat, and pressure typical of Ford 7.3L Power Stroke...- $261.17
- $261.17
- Unit price
- per
Get the guides first
Seasonal driving guides for Canada and a heads-up when new stock lands. No spam, unsubscribe any time.














































