-
Vendor:AUTOKAY
AUTOKAY Injector Adapters for LQ4 LQ9 4.8/5.3/6.0 — 8‑Pack Delphi Mini to EV6/USCAR Plug, Plug-and-Play
AUTOKAY injector adapters are an 8-piece wiring solution that lets 1999-and-up GM Delphi Mini harnesses connect to LS2/LS3/LS7 (USCAR/EV6) style fuel injectors. If you’re swapping injectors or updating an engine in a 1999+ GM full-size truck or SUV, the wiring ends don’t always match...- $54.60
- $54.60
- Unit price
- per
-
Vendor:LOKFASISHA
LOKFASISHA Idle Air Control Valve for 1991–2003 Dodge/Jeep (53030657AC) — Direct OEM Fit, Restores Smooth Idle
The LOKFASISHA 53030657AC Idle Air Control Valve is a direct OEM-spec replacement that restores steady idle and reduces stalling for 1991–2003 Dodge and Jeep 3.9L/5.2L/5.9L engines. If your Dakota, Ram, Durango or Grand Cherokee from 1991–2003 is hesitating at cold start, rough idling, or...- $54.20
- $54.20
- Unit price
- per
-
Vendor:MOTOALL
MOTOALL Fuel Injector Connector Adapters EV1 to EV6 — 8-Pack, Plug-and-Play for 1982–1992 Camaro/Firebird
MOTOALL EV1 to EV6 Fuel Injector Connector Adapters let you connect Bosch EV1 injectors to an EV6 wiring harness quickly and without cutting or splicing. These eight plug-and-play adapters convert EV1-style injector pins to the EV6 wiring standard so you can fit Bosch injectors...- $54.39
- $54.39
- Unit price
- per
-
Vendor:Fel-Pro
Fel-Pro Fuel Injection Plenum Gasket Set for Toyota/Lexus V6 — MS96786, Complete Intake Seal Kit
Fel-Pro MS 96786 is a complete fuel injection plenum gasket set engineered to restore a factory-quality seal for compatible Toyota and Lexus V6 engines. When intake gaskets age they can cause vacuum leaks, rough idle and fuel trim issues. This Fel-Pro set uses application-specific...- $52.51
- $52.51
- Unit price
- per
-
Vendor:Fel-Pro
Fel-Pro fuel injection plenum gasket set for Toyota Sienna (2004–2006) — complete intake seal kit, OE-fit durability
Fel-Pro MS 96586 is a complete fuel injection plenum gasket set engineered to restore a reliable intake seal on compatible Toyota and Lexus engines. This gasket set provides the sealing components needed when replacing a fuel injection plenum on select Toyota Sienna models (and...- $54.22
- $54.22
- Unit price
- per
-
Vendor:A-Premium
A-Premium Fuel Injection Idle Air Control Valve — 4-Pin Plug, Direct-Fit Replacement, OE-Style
The A-Premium Fuel Injection Idle Air Control Valve with a 4-pin plug regulates idle airflow for compatible GM, Land Rover, Jaguar, Isuzu and other models to help stabilize engine idle. This aftermarket idle air control (IAC) valve from A-Premium is designed as a direct-replacement...- $54.60
- $54.60
- Unit price
- per
-
Vendor:HIMIKI
HIMIKI Fuel Rail Pressure Sensor 3F2Z9G756AC for Ford F-Series & SUVs — Direct-Fit, OEM-Style Replacement
HIMIKI Fuel Rail Injection Pressure Sensor 3F2Z9G756AC is a direct-fit replacement sensor that restores accurate fuel rail pressure readings for compatible Ford vehicles and trucks. This high-precision replacement maps fuel rail pressure to the engine control module so the fuel system can adjust delivery...- $54.60
- $54.60
- Unit price
- per
-
Vendor:WEILEITE
WEILEITE Fuel Injector for HiSun EFI UTV/ATV 2-Hole — Direct-Fit Replacement (2011–2018), Corrosion-Resistant
WEILEITE 2-hole fuel injector is a direct-fit replacement for select 2011–2018 HiSun EFI UTVs, ATVs and utility tractors, restoring precise fuel delivery and reliable engine performance. This injector is engineered as a factory-tested replacement part that meets or exceeds OEM specifications for HiSun EFI...- $52.51
- $52.51
- Unit price
- per
-
Vendor:HiSport
HiSport Fuel Injector for 3.6L V6 — OEM 0280158233 / 5184085AC Single Piece, 4‑Hole Spray
HiSport Fuel Injector 0280158233 (OE 5184085AC) is a single direct-replacement injector engineered for 3.6L V6 engines to restore precise fuel delivery and smoother engine operation. If your 3.6L Chrysler, Dodge, Jeep or Ram is showing rough idle, reduced responsiveness, or uneven fuel delivery, a...- $54.14
- $54.14
- Unit price
- per
-
Vendor:Vkinman
Vkinman Fuel Injector 3089893 Replacement for Polaris Sportsman 500 & Ranger 500 (2006–2013) — Direct Fit, Tested
The Vkinman Fuel Injector 3089893 is a direct-fit aftermarket replacement engineered to restore fuel delivery for Polaris Sportsman 500 EFI (2006–2009) and Polaris Ranger 500 EFI (2006–2013). This injector is built as a precise substitute for part number 3089893, offering a cost-effective option when...- $52.51
- $52.51
- Unit price
- per
-
Vendor:NewYall
NewYall Fuel Tank Pressure Sensor for Ford Contour & Crown Victoria — Direct-Fit, Sealed Connector
NewYall Gas Fuel Tank Pressure Sensor replaces the OEM tank pressure sensor to restore accurate fuel vapor monitoring and evaporative system performance on compatible Ford, Lincoln and Mercury vehicles. This direct-fit replacement sensor is designed for a wide range of late-1990s and 2000s Ford,...- $52.51
- $52.51
- Unit price
- per
-
Vendor:Bosch
Bosch BT 150 Tripod Adapter 1618C0110Z — OEM replacement mount for laser levels, exact-fit alignment
The Bosch 1618C0110Z is a genuine OEM adapter mount designed to attach Bosch BT 150 tripods securely to compatible tools and accessories. This replacement adapter from Bosch restores factory-fit mounting between the BT 150 tripod and Bosch laser levels or other compatible devices. It...- $52.51
- $52.51
- Unit price
- per
-
Vendor:VIKKSAER
VIKKSAER Injector Harness Adapter Kit EV1 to Delphi Multec LQ4/LQ9 — 8pc, Tinned Copper, Pre-crimped
VIKKSAER 8-piece injector harness kit adapts EV1/LS1/LS6/LT1 engine harnesses to Delphi Multec LQ4/LQ9 fuel injectors for 4.8, 5.3 and 6.0 truck engines. This set of eight pigtail adapters lets you connect Delphi Multec-style injectors used on LQ4 and LQ9 truck engines to EV1-style harnesses...- $54.18
- $54.18
- Unit price
- per
-
Vendor:HiSport
HiSport Fuel Injection Pressure Regulator Kit 3.8BAR with Clip Snap Ring — OE-Quality, Tested
HiSport's 3.8BAR Fuel Injection Pressure Regulator Kit with clip snap ring precisely controls fuel rail pressure to restore proper fuel delivery for compatible engines. If your engine is experiencing poor idling, rough acceleration or inconsistent fuel trim, a worn or damaged fuel pressure regulator...- $54.60
- $54.60
- Unit price
- per
-
Vendor:KSJED
KSJED Throttle Body Adapter Kit — 3‑Bolt DBW to 4‑Bolt LS Intake, 75–102mm Taper with Gasket & Hardware
KSJED throttle body adapter lets you mount a 3-bolt drive-by-wire (DBW) LS throttle body to a 4-bolt LS intake manifold quickly and securely. If you want to pair a modern 3-bolt DBW throttle body—common to LS1-series and other LS families—with a 4-bolt intake such...- $54.58
- $54.58
- Unit price
- per
-
Vendor:VKVXCLON
VKVXCLON Turbo Oil Feed Line Kit for T3/T4 & GT Series – 1/8 PNT 90° 41" Stainless Braided
VKXVCLON Turbo Oil Feed Line Kit is a 41-inch, 1/8 PNT stainless-steel braided oil feed line with a 90° fitting, built to replace worn turbo oil lines on T3/T4 and compatible turbochargers. This replacement oil feed line is made to restore reliable oil delivery...- $54.52
- $54.52
- Unit price
- per
-
Vendor:Fel-Pro
Fel-Pro Fuel-Injection Plenum Gasket Set for Chevrolet Corvette 1985–1991 — Complete Seal Kit
Fel-Pro MS 93160 is a complete fuel-injection plenum gasket set engineered to restore a reliable seal on compatible Chevrolet Corvette engines. This gasket set includes precisely engineered components and proprietary sealing materials designed for the repair environment where mating surfaces may be worn or...- $52.93
- $52.93
- Unit price
- per
-
Vendor:KPALAG
KPALAG Fuel Injection Pressure Regulator 3.8BAR with Clip & Snap Ring — Stainless Steel OE Fit
KPALAG Fuel Injection Pressure Regulator 3.8BAR is a direct-fit replacement regulator with clip and snap ring designed to restore correct fuel rail pressure on compatible GM vehicles. This precision replacement part is built from stainless steel and high-durability fluororubber O-rings to resist corrosion, oil...- $54.60
- $54.60
- Unit price
- per
-
Vendor:BESULEN
BESULEN Fuel Tank Pressure Sensor — direct-fit OEM 16238399 16196060, plug-and-play, factory-calibrated
BESULEN Fuel Tank Pressure Sensor (OEM 16238399 / 16196060 / 12219388) is a direct-fit replacement part that monitors fuel tank pressure to help your vehicle’s evaporative system run correctly. This high-quality sensor from BESULEN is built to match original equipment specifications and withstand temperature...- $52.51
- $52.51
- Unit price
- per
-
Vendor:Vkinman
Vkinman Fuel Injector Replacement for Honda Rancher 420 TRX420FM/TRX420FPM (2007–2013) — Direct-Fit IJ105/3, OEM-Style Connector
Vkinman Fuel Injector Replacement for Honda Rancher 420 4X4 (2007–2013) is a direct-fit replacement for part IJ105/3, engineered to restore reliable fuel delivery to TRX420FM and TRX420FPM engines. If your Honda Rancher 420 is exhibiting rough idling, poor throttle response, or inconsistent fuel delivery,...- $59.61
- $59.61
- Unit price
- per
-
Vendor:X AUTOHAUX
X AUTOHAUX Fuel Injection Pressure Regulator for Ford F-150/F-250 1994-1999 — OE Fit, Reinforced Durable Replacement
X AUTOHAUX Fuel Injection Pressure Regulator restores stable fuel rail pressure for compatible Ford F-150, F-250, F-350 and Super Duty models from the mid‑1990s to early‑2000s. If your Ford’s fuel delivery feels uneven, or the engine shows running issues traceable to rail pressure, this...- $62.74
- $62.74
- Unit price
- per
-
Vendor:M MATI
M MATI Idle Air Control Valve Stepping Motor for Polaris ATVs and UTVs — Model 3131629, OEM Fit & Improved Idle
The M MATI Idle Air Control Sensor Valve (stepping motor) is a direct-replacement idle control unit designed to restore consistent idle speed and throttle response on compatible Polaris ATV and UTV models. This aftermarket idle air control (IAC) stepping motor is built to OEM...- $55.85
- $55.85
- Unit price
- per
-
Vendor:Dorman
Dorman Fuel Primer Seal Kit with Brass Bleeder Screw for GMC/Chevrolet — 5 Gaskets & OE-FIX Repair
This Dorman 904-124HP Fuel Primer Seal Kit replaces worn primer housing gaskets and swaps the fragile plastic bleeder screw for a durable brass screw to restore a proper seal. If the fuel primer housing on certain GMC or Chevrolet trucks has a stripped or...- $60.46
- $60.46
- Unit price
- per
-
Vendor:Panwarmoll
Panwarmoll FPS7 Fuel Injection Pressure Regulator Sensor 3R3E-9F972-AA — Direct-Fit OE-Style Replacement for Ford/Lincoln/Mercury/
Panwarmoll FPS7 fuel injection pressure regulator sensor (3R3E-9F972-AA) monitors fuel rail pressure and replaces OE sensors on many Ford, Lincoln, Mercury and Jaguar models. If your vehicle is exhibiting rough idle, poor fuel economy, or trouble codes related to rail pressure, this direct-fit replacement...- $58.77
- $58.77
- Unit price
- per
-
Vendor:QFISH
QFISH Fuel Injection Pressure Regulator 17113556/89060418 — Direct-fit for GM V8, Metal-bodied Durable
QFISH fuel injection pressure regulator (part numbers 17113556, 89060418) precisely stabilizes fuel pressure for compatible GM vehicles, restoring consistent injector performance and throttle response. This metal-bodied pressure regulator replaces worn OEM units in a range of Chevrolet, GMC, Cadillac, Buick, Hummer and Isuzu models...- $55.85
- $55.85
- Unit price
- per
-
Vendor:A-Premium
A-Premium Fuel Injection Idle Air Control Valve for Dodge Ram Jeep — 4-Pin Direct-Fit, OE Match
The A-Premium Fuel Injection Idle Air Control Valve with a 4-pin plug is a direct-fit replacement that regulates idle airflow to stabilize engine idle in compatible Dodge, Ram and Jeep models. If your vehicle is experiencing rough idling, fluctuating RPMs when stopped, or inconsistent...- $55.44
- $55.44
- Unit price
- per
-
Vendor:Goopool
Goopool Fuel Pressure Regulator Vacuum/Purge Harness for 3.8L GM (24506640) — Direct-Fit, Oil-Resistant
The Goopool 24506640 fuel pressure regulator vacuum/vapor purge harness is a direct-fit replacement hose designed to restore proper vacuum routing on select 3.8L GM vehicles from 1998–2005. This replacement harness fits in place of OE part number 24506640 and is made from oil-resistant materials...- $58.77
- $58.77
- Unit price
- per
-
Vendor:X AUTOHAUX
X AUTOHAUX Fuel Injector Seal Repair Kit for VW & Audi — 4-Set O-Rings & Pintle Caps (Fits 06H998907A/06J998907)
X AUTOHAUX 4-set fuel injector seal repair kit replaces worn O-rings and pintle caps for VW and Audi engines using part numbers like 06H998907A, 06J998907A and similar. This compact repair kit supplies the common upper and lower injector seals and retaining caps needed when...- $55.02
- $55.02
- Unit price
- per
-
Vendor:HHC Diesel
HHC Diesel Ford 6.0L Nipple Cup O-Rings Set of 8 — Heavy-Duty Viton Blend, 2003–2007 Fit, High-Temp Oil Resistance
HHC Diesel Ford 6.0L Nipple Cup/Ball Tube O-Rings are a set of eight heavy-duty Viton-blend seals designed to replace worn nipple cup and top injector seals on 2003–2007 6.0L oil rails. If your Ford 6.0L diesel is experiencing a hot no-start or oil loss...- $56.69
- $56.69
- Unit price
- per
-
Vendor:ApplianPar
ApplianPar Fuel Rail Pressure Sensor for Audi & Volkswagen — Single Sensor, OEM Fitment, Direct Replacement
ApplianPar fuel rail pressure sensor is a direct-fit replacement sensor designed to restore accurate fuel pressure readings on compatible Audi and Volkswagen models. This high-quality replacement sensor monitors fuel rail pressure and communicates that data to the engine control module (ECM), helping the vehicle...- $56.69
- $56.69
- Unit price
- per
-
Vendor:Motoforti
Motoforti A/C Pressure Sensor Transducer for Honda Accord 2005–2020 — Black Metal, Direct-Fit OE Connector
Motoforti A/C Pressure Transducer Valve is a direct-fit replacement pressure sensor switch engineered to restore accurate refrigerant pressure readings on compatible Honda models. This Motoforti sensor is designed to replace worn or failed factory A/C pressure transducers on a broad range of Honda vehicles,...- $58.77
- $58.77
- Unit price
- per
-
Vendor:kakeken
kakeken 40" Excavator Throttle Control Cable — 40-inch Direct-Fit, Wear-Resistant Replacement
This 40" kakeken throttle control cable is a direct-fit replacement for excavators that restores precise throttle response and reliable gear control. If your excavator's throttle feels loose, sticks, or fails to return smoothly, a worn control cable is often the cause. The kakeken 40-inch...- $61.51
- $61.51
- Unit price
- per
-
Vendor:FITIPICI
FITIPICI 5/16" Fuel Connector for Tohatsu/Nissan Outboards 5–90HP — Metal OEM-Style, Corrosion-Resistant
FITIPICI 5/16" fuel connector is a direct-fit metal replacement for Tohatsu/Nissan outboard engines (2- and 4-stroke) rated 5–90 HP, restoring a secure fuel line connection. This compact metal fuel coupling replaces worn or damaged 5/16" connectors on many Tohatsu and Nissan outboards. Sold under...- $57.29
- $57.29
- Unit price
- per
-
Vendor:OCHIKI
OCHIKI Fuel Injection Pressure Regulator — fits 17113556/89060418, Direct-Fit Metal for GM V6/V8
OCHIKI fuel injection pressure regulator (fits part numbers 17113556, 89060418) controls fuel rail pressure to keep your engine's injection stable and responsive. This direct-fit replacement regulator is built for select GM V8 and V6 applications — including many Chevrolet Silverado, Tahoe, Suburban, GMC Sierra,...- $58.77
- $58.77
- Unit price
- per
-
Vendor:JAVIK
JAVIK Idle Air Control Valve for Honda ATV/UTV — Direct-Fit IACV for Rancher/Rubicon/Foreman (OEM 16430-HP6-A01)
JAVIK Idle Air Control Valve Set replaces the throttle body IACV to restore smooth idling and consistent engine response on compatible Honda ATVs and UTVs. This replacement Idle Air Control Valve (IACV) is designed as an OEM-style substitute for Honda models including Rancher, Rubicon,...- $56.06
- $56.06
- Unit price
- per
-
Vendor:YKWYKW
YKWYKW Hydro Boost Seal Kit 1.6in Bore Rebuild for Chevy & Ford — Complete Seals & Washers
YKWYKW Hydro Boost Seal Leak Repair Kit 2771004 is a complete replacement seal kit designed to restore hydraulic pressure and stop leaks on compatible hydroboost units for select Chevy and Ford trucks. This repair kit contains the seals and small metal components needed to...- $62.72
- $62.72
- Unit price
- per
-
Vendor:OSKYUO
OSKYUO Fuel Injection Pressure Sensor for Ford & Lincoln — CM-5250 Direct-Fit BU5Z-9F972-B, Corrosion-Resistant
The OSKYUO CM-5250 is a direct-fit fuel injection pressure sensor (replaceable OEM BU5Z-9F972-B) designed to restore accurate fuel-rail pressure readings on compatible Ford and Lincoln vehicles. This engineered replacement sensor measures fuel-rail pressure and communicates real-time data to the engine control module so the...- $58.77
- $58.77
- Unit price
- per
-
Vendor:ZrAutomch
ZrAutomch Back Pressure Valve Terminator for Ford 7.3L Powerstroke 1999-2003 — Plug-in Harness Adapter, Prevents EBPV OBD-II Codes
ZrAutomch Back Pressure Valve Terminator for Ford 7.3L Powerstroke (1999–2003) is a plug-in harness adapter that keeps the EBPV circuit open and helps prevent OBD-II fault codes when the factory back pressure solenoid is bypassed. This compact black plastic unit fits directly into the...- $56.46
- $56.46
- Unit price
- per
-
Vendor:KEJSTED
KEJSTED 7.3L ICP Injection Control Pressure Sensor & Pigtail Kit for Ford 1994–2003 — OEM-Style, Corrosion-Resistant
KEJSTED's 7.3 ICP Injection Control Pressure Sensor & pigtail kit replaces the factory ICP sensor to restore accurate injection control pressure readings for Ford Powerstroke 7.3L diesel engines. This OEM-style replacement sensor monitors oil pressure that the vehicle’s PCM uses to command the IPR...- $60.44
- $60.44
- Unit price
- per
-
Vendor:FainWan
FainWan fuel injector adapter kit — 8pcs EV1 to USCAR EV6/EV14 for Chevy LS1 LS2 LS3, plug-and-play harness saver
These FainWan 8-piece fuel injector adapter connectors convert legacy EV1 injector plugs to modern USCAR EV6 and EV14 injector sockets for LS1–LS3 swaps and cross-brand installs. If you're updating or swapping injectors on a Che-vy LS family motor, or adapting injectors from Fo-rd, Do-dge,...- $56.69
- $56.69
- Unit price
- per
-
Vendor:Sxqddz
Sxqddz CAN Bus Y-Splitter Cable MA558-465 for Holley ECUs — Shielded 4‑Wire, Compact Plug‑and‑Play
The Sxqddz MA558-465 CAN Bus Y-Splitter is a compact, shielded four-wire adaptor that lets you connect a handheld and a laptop (or two CAN devices) simultaneously to compatible Holley EFI units. This compact adapter is engineered for engine management setups that use the CAN...- $56.06
- $56.06
- Unit price
- per
-
Vendor:A-Premium
A-Premium Idle Air Control Valve for Dodge & Jeep 4-Pin Plug — Direct-Fit 4.0L/2.5L, Restores Stable Idle
The A-Premium Fuel Injection Idle Air Control Valve with a 4-pin plug is a direct-replacement IAC unit that restores stable idle control for compatible Dodge Dakota and Jeep 4.0L models. If your engine idle is rough, inconsistent, or stalling at low speed, this replacement...- $56.69
- $56.69
- Unit price
- per
-
Vendor:A-Premium
A-Premium Turbocharger Oil Feed Line for GM 1.4L Turbo (Buick Encore, Chevy Cruze/Sonic/Trax) — Direct-Fit, Leak-Resistant
The A-Premium Turbocharger Turbo Oil Feed Line Pipe Tube is a direct-fit inlet oil feed line engineered to supply reliable lubrication and cooling to turbochargers on select 1.4L Buick and Chevrolet models. This turbo oil feed line replaces the original inlet pipe to restore...- $56.69
- $56.69
- Unit price
- per
-
Vendor:Powkos
Powkos Fuel Pressure Regulator 27BAR (replaces PR15T) — Direct-fit for Ford/Mazda, Aluminum Construction
Powkos 27BAR Fuel Pressure Regulator (replaces PR15T) is a direct-fit replacement part that restores consistent fuel pressure for compatible Ford, Lincoln, Mazda, and Mercury applications. This replacement fuel pressure regulator is built to match or outperform OEM expectations, offering a durable aluminum and composite...- $56.69
- $56.69
- Unit price
- per
-
Vendor:Fel-Pro
Fel-Pro Fuel Injection Plenum Gasket Set MS97205 for Jeep Grand Cherokee — Complete OEM-Fit Intake Seal Kit
Fel-Pro MS 97205 is a complete fuel-injection plenum gasket set engineered to restore a reliable intake seal using application-specific materials and OEM-style fitment. Fel‑Pro designs gaskets for professional repairs, combining proprietary sealing materials and validation testing to help prevent intake leaks and maintain engine...- $56.67
- $56.67
- Unit price
- per
-
Vendor:Ummickl
Ummickl Heat Shield Sleeve 1/2" ID x 10ft Titanium-Style Basalt Wrap — 2500°F Reflective, Flexible
Ummickl's titanium-style heat shield sleeve is a flexible, cut-to-length protective wrap designed to block radiant heat up to severe temperatures and protect fuel lines, spark plug wires, brake cables and wiring looms. This 1/2" internal diameter, 10-foot roll of basalt-based heat sleeve is built...- $60.63
- $60.63
- Unit price
- per
-
Vendor:Ummickl
Ummickl Titanium Heat Shield Sleeve 1" x 10' — Basalt Fiber High-Temp Wrap, 2500°F Radiant Heat Protection
Ummickl Titanium Heat Shield Sleeve is a 1" inner-diameter, 10-foot basalt-based wrap that protects fuel lines, spark plug wires, and cable looms from extreme radiant heat up to intermittent 2500°F. This flexible heat sleeve roll is designed for automotive and motorcycle use where high-temperature...- $60.63
- $60.63
- Unit price
- per
-
Vendor:GXARTS
GXARTS 24" Turbo Oil Feed Line 4AN 90° to Straight — Stainless Braid, PTFE Hose
GXARTS 24" stainless braided 4AN turbo oil feed line with a 90° to straight PTFE hose end provides a durable, leak-resistant replacement for worn or damaged feed fittings. When your turbocharger needs a reliable oil supply, this 24-inch GXARTS assembly combines stainless-steel braid, PTFE...- $56.27
- $56.27
- Unit price
- per
-
Vendor:GXARTS
GXARTS 36" Turbo Oil Feed Line 4AN 90° to Straight PTFE Stainless Steel Braided - Billet Fittings
GXARTS 36" billet steel braided turbo oil feed line is a 4AN PTFE hose assembly with a 90° swivel and straight end, built to replace worn OEM turbo oil feeds and resist heat, pressure, and abrasion. This 36-inch oil feed line from GXARTS is...- $58.15
- $58.15
- Unit price
- per
-
Vendor:XINPENGLIU
XINPENGLIU Heat Shield Sleeve for Fuel Lines & Wiring — Black 1" ID x 3.3ft, Silicone-Coated 800°F
XINPENGLIU's 1" ID x 3.3ft silicone-coated fiberglass heat shield sleeve protects fuel lines, hoses and wiring from intense heat and abrasion. Designed for under-hood and exhaust-area use, this heat-protection sleeve combines a fiberglass inner core with a durable silicone outer coating to resist extreme...- $58.54
- $58.54
- Unit price
- per
Get the guides first
Seasonal driving guides for Canada and a heads-up when new stock lands. No spam, unsubscribe any time.
















































