Fuel System Parts

EVIL ENERGY 10AN male weld-on bung fitting is a four-piece set of 6061-T6 aluminum threaded bungs that let you add reliable AN-style fluid connections to tanks, lines, or custom fabrications. These weld-on bungs provide a compact, serviceable port for attaching AN hoses or adapters...

KSJED throttle body adapter lets you mount a 3-bolt drive-by-wire (DBW) LS throttle body to a 4-bolt LS intake manifold quickly and securely. If you want to pair a modern 3-bolt DBW throttle body—common to LS1-series and other LS families—with a 4-bolt intake such...

BARTOO’s 1/4" aluminum air cleaner spacer provides a lightweight, leak-resistant separation between the carburetor and air cleaner for engines using a 5-1/8" carburetor opening. This precision-machined spacer is made from high-grade aluminum and designed to fit popular carburetors with a 5-1/8" opening, including Holley,...

Podavelle's AN6 male flare to 1/4" hardline compression adapter is a straight, black-anodized 6061-T6 aluminum fitting that joins aftermarket 6AN hoses to 1/4" hard tubing for fuel, oil, transmission and power steering systems — supplied as a two-piece set with internal brass ferrules. These...

EVIL ENERGY 6AN male to 3/8" barb push-on adapter is a two-piece aluminum fitting designed to connect 6AN-threaded ports to 3/8" rubber hose with a secure 37° AN seal for high-pressure automotive and performance applications. This two-pack of push-on adapters is machined from 6061-T6...

EVIL ENERGY's 6AN male flare to 1/8" NPT 90° swivel fitting adapter is a black anodized 6061-T6 aluminum connector that converts a 6AN flare connection to a 1/8-27 NPT threaded port while allowing a 90° swivel for tight routing. When plumbing fuel, vacuum, or...

The EVIL ENERGY 6AN male flare to 1/4" NPT 90-degree swivel fitting adapter converts AN flare connections to 1/4-18 NPT threads while allowing a full-swivel installation for compact, leak-resistant routing. This precision-machined adapter is built for fuel-system and fluid-routing tasks where a durable, sealed...

EVIL ENERGY's 6AN male to 3/8" quick-disconnect female push-on fitting is a single-piece, 6061-T6 aluminum connector that lets you join a 6AN threaded line to a 3/8" spring-lock fuel hose quickly and securely. This compact adapter combines a 6AN (9/16-18 UNF) male flare with...

The K-MOTOR PERFORMANCE M12x1.25 Banjo Bolt Kit is a compact, threaded adapter designed to route fuel, oil, coolant, water or air through a 12mm banjo port while providing a sealed 1/8 NPT upper port for sensors or bleed fittings. This M12-12MM banjo bolt assembly...

LXROAR01 Fuel Filler Neck Housing is a direct-fit replacement for OEM 15149668 that restores a secure, leak-free connection between the fuel filler and tank on many Chevrolet and GMC trucks and SUVs. This fuel filler neck housing is engineered to match the factory fit...

VKXVCLON Turbo Oil Feed Line Kit is a 41-inch, 1/8 PNT stainless-steel braided oil feed line with a 90° fitting, built to replace worn turbo oil lines on T3/T4 and compatible turbochargers. This replacement oil feed line is made to restore reliable oil delivery...

Fel-Pro MS 93160 is a complete fuel-injection plenum gasket set engineered to restore a reliable seal on compatible Chevrolet Corvette engines. This gasket set includes precisely engineered components and proprietary sealing materials designed for the repair environment where mating surfaces may be worn or...

sworwin's fuel pump kit is a direct-fit carburetor replacement for Kawasaki Mule 600/610 4x4 models (2007–2014) built to match OEM dimensions and restore reliable fuel delivery. If your Mule is running rough, stalling, or you see fuel delivery issues, the fuel pump and filter...

The SeaSierra 65750-87J11 is a direct-fit 3/8" fuel line connector designed to replace Suzuki outboard OEM connectors for 4–140 HP engines, engineered for saltwater durability and easy installation. If you maintain Suzuki outboards or perform marine engine repairs, this SeaSierra connector provides a robust,...

HiQltyla HEP-02A is a universal 24V total-copper electric fuel pump designed to deliver steady 3–8 PSI pressure and 80–120 L/h flow for carbureted engines, ATVs, motorcycles, lawn mowers and light diesel applications. This compact, all-copper pump is built for consistent performance in 24V systems...

Replacement water-in-fuel sensor for Dodge Ram 2500/3500/4500/5500 6.7L (2013–2018) that detects fuel contamination and fits OE part numbers 904-462, 68197868AA, 68197868AB. This Shibeiparts water separator sensor is designed as a direct-fit replacement for diesel Ram trucks equipped with the 6.7L engine from model years...

KPALAG Fuel Injection Pressure Regulator 3.8BAR is a direct-fit replacement regulator with clip and snap ring designed to restore correct fuel rail pressure on compatible GM vehicles. This precision replacement part is built from stainless steel and high-durability fluororubber O-rings to resist corrosion, oil...

Earlyred Fuel Petcock Switch Valve is a direct-fit replacement fuel shutoff assembly for many Yamaha Kodiak and Grizzly 400/450 models, complete with lever, fuel line and adjustable screws. This aftermarket fuel valve from Earlyred is designed to replace worn or leaking petcocks on a...

RYANSTAR AN6 fuel shut-off valve is a compact, anodized-aluminum 6AN male-to-female inline valve that lets you quickly stop or resume fuel flow with a single lever turn. This precision-machined valve is built for automotive, motorsport, marine, and custom-fuel-system applications where a reliable manual shutoff...

ALL-CARB 20 853 33-S is a direct-fit replacement carburetor engineered to restore fuel flow and reliable starting for Kohler 19–22HP engines and compatible Toro mowers. If your small engine is experiencing hard starts, rough idling, or loss of power, this ALL-CARB carburetor is built...

The KPALAG 1/2" Drive Fuel Tank Lock Ring Tool is a heavy-duty, heat-treated high-carbon steel spanner designed to remove and install fuel pump senders and lock rings quickly and safely using an impact wrench or breaker bar. This specialized automotive tool replaces improvised wrenches...

Replacement fuel pump kit compatible with Arctic Cat 400/500/650 and several Kawasaki and Can-Am models, supplied with clamps and a fuel filter for direct fit and reliable fuel delivery. This MOTO1988 fuel pump kit is designed to restore proper fuel delivery on a range...

The JADSOrBoBi 90° Fuel Elbow is a brushed-metal, 1/4" fuel-line tank fitting with a rubber grommet that installs into a 1/2" drilled hole to provide a secure, leak-resistant connection for fuel, oil, water, coolant, and air systems. This compact 90-degree elbow is built for...

EVIL ENERGY AN6 female-to-male full-flow swivel is a lightweight 6061-T6 aluminum adapter that provides a 360° rotating, 37°-sealed AN connection for high-flow fuel, oil, turbo and power-steering lines. This precision-machined adapter from EVIL ENERGY replaces rigid fittings with a one-piece, full-flow design that reduces...

JZGRDN's 8-piece hydraulic quick coupler dust cap and plug set protects 1/4" John Deere hydraulic fittings from dirt, moisture, and wear when disconnected. This new set includes four dust caps and four plugs engineered to fit the common 1/4" John Deere quick coupler sizes...

High-quality sworwin carburetor designed as a direct replacement for Honda GCV160-series engines and compatible Ryobi pressure washer models, restoring smooth starting and steady engine idling. This replacement carburetor from sworwin is manufactured to match OEM form and function for Honda GCV160, GCV160A, GCV160LA, GCV160LE...

AP Products Versachem 90214 is a two-part epoxy repair kit that permanently seals gasoline, diesel and kerosene tank leaks up to 1/2" without removing the tank. This compact 30 gram kit combines resin and hardener to create a heat-curing, chemical-resistant patch designed for quick...

The Hipa 640350 LV195EA carburetor kit is a drop-in replacement for Toro 20016/20017/20018 and compatible Tecumseh LV195EA engines, supplied as a fully pre-tuned, ready-to-install assembly with filters and hardware. If your Toro walk-behind mower with a 6.75HP engine is running rough, hard to start,...

Replaceable adjustable needle-and-seat pair with 0.110" orifice and Viton seals for Holley and Quick Fuel carburetors. This AED 5110 Needle & Seat assembly is a precision replacement set designed to restore proper fuel metering in carburetors that accept a 0.110" orifice. Each kit contains...

AIPICO AM876265 is a direct-replacement electric fuel pump engineered to restore reliable fuel delivery on compatible John Deere lawn tractors, zero-turn mowers and Gator utility vehicles. Designed as an aftermarket substitute for OEM pumps, this AIPICO unit fits a range of John Deere applications...

1PZ carburetor designed as a direct replacement for Kohler K321 and K341 cast-iron engines, restoring fuel metering and reliable starting on compatible tractors. This replacement carburetor fits Kohler K-Series K321 (14HP) and K341 (16HP) cast-iron engines used in a range of lawn and garden...

Edelbrock 1464 is a five-spring carburetor step-up kit designed to let you fine-tune accelerator pump response and throttle feel across a range of engine demands. This compact kit bundles five steel step-up springs in distinct tensions (3 Hg-blue, 4 Hg-yellow, 5 Hg-orange, 7 Hg-pink,...

AUTOKAY 594593 / 591731 is a direct-fit carburetor replacement kit designed to restore fuel delivery and throttle response on compatible 14–18 HP Intek and Toro riding-mower engines. If your compact tractor or riding mower has a leaking, clogged, or damaged carburetor, swapping in this...

SeaEagles 135-10 30cc accelerator pump diaphragm is a direct-fit replacement kit that restores proper fuel squirt and throttle response on Holley 2300 and 4150 carburetors. This replacement diaphragm kit supplies the parts needed to revive the accelerator pump function in Holley-style carburetors commonly found...

The LockNLube Recessed Fitting Adapter is a 6-inch heavy-duty grease fitting extension that lets you reach deeply recessed or awkwardly positioned grease fittings for a secure, leak-minimized connection. Designed for mechanics, fleet technicians, and equipment owners who face difficult-to-access lubrication points, this adapter extends...

Replacement carburetor compatible with Kohler K321 and K341 14HP–16HP cast iron engines, supplied with gaskets, fuel filter, and mounting accessories for quick installation. This RADHLBNIU carburetor kit is designed as a direct-fit remedy for worn or damaged carburetors on small tractors and lawn equipment...

EVIL ENERGY AN6 male flare to 1/4" NPSM adapters are CNC-machined aluminum fittings that convert AN6 (9/16"-18 UNF) transmission cooler lines to 1/4"-18 NPSM ports for 4L80E-type transmissions. These two purpose-built adapters let you connect common 6AN hoses to the front and rear transmission...

suamoterr carburetor kit 799583 is a complete plug-and-play replacement set that restores fuel delivery for Briggs & Stratton 125cc–140cc OVH vertical engines used in many Toro, Craftsman and MTD mowers. When a lawn mower runs rough, smokes, stalls or fails to start, the carburetor...

Vkinman Fuel Injector Replacement for Honda Rancher 420 4X4 (2007–2013) is a direct-fit replacement for part IJ105/3, engineered to restore reliable fuel delivery to TRX420FM and TRX420FPM engines. If your Honda Rancher 420 is exhibiting rough idling, poor throttle response, or inconsistent fuel delivery,...

X AUTOHAUX Fuel Injection Pressure Regulator restores stable fuel rail pressure for compatible Ford F-150, F-250, F-350 and Super Duty models from the mid‑1990s to early‑2000s. If your Ford’s fuel delivery feels uneven, or the engine shows running issues traceable to rail pressure, this...

Pro Chaser SH265 carburetor: a complete replacement carburetor kit engineered to restore fuel delivery and reliable starting for Kohler 6.5 HP (196cc) engines and compatible small-engine equipment. This kit supplies a ready-to-install carburetor and all commonly needed accessories so you can swap a worn...

WFLNHB 594593 is a direct-fit replacement carburetor designed to restore fuel delivery for select Briggs & Stratton 14.5–21HP mower engines. This aftermarket carburetor fits a wide range of Briggs & Stratton small engine part numbers and models (including 796109, 591731, 594601, 594605 and many...

GooDeal AUTOKAY replacement carburetor with gaskets restores fuel delivery for Robin/Subaru EX21 and similar small engines. If your lawnmower or small engine powered by a Robin/Subaru EX21 (EX170/SP170/DM2231 series) is running rough, hard to start, or idling poorly, this OEM-fit AUTOKAY carburetor with new...

A complete Koubliztic replacement carburetor kit engineered to restore reliable starting and steady idle for Troy-Bilt 163cc mower engines. If your Troy-Bilt lawn mower is hard to start, stalls under load, or runs unevenly, the carburetor is a common culprit. The Koubliztic TB230 carburetor...

The M MATI Idle Air Control Sensor Valve (stepping motor) is a direct-replacement idle control unit designed to restore consistent idle speed and throttle response on compatible Polaris ATV and UTV models. This aftermarket idle air control (IAC) stepping motor is built to OEM...

TOTEDELL carburetor kit replaces the original carburetor on Sunseeker SK-C26E2 and Hyper Tough HT14-401-001-02 trimmers and ships complete with gaskets, primer bulbs, fuel fittings and a spark plug. This complete replacement kit offers the core fuel and ignition parts needed to restore small 2-stroke...

This Dorman 904-124HP Fuel Primer Seal Kit replaces worn primer housing gaskets and swaps the fragile plastic bleeder screw for a durable brass screw to restore a proper seal. If the fuel primer housing on certain GMC or Chevrolet trucks has a stripped or...

Panwarmoll FPS7 fuel injection pressure regulator sensor (3R3E-9F972-AA) monitors fuel rail pressure and replaces OE sensors on many Ford, Lincoln, Mercury and Jaguar models. If your vehicle is exhibiting rough idle, poor fuel economy, or trouble codes related to rail pressure, this direct-fit replacement...

The Tusk 3-piece gasket scraper kit provides three blade widths and ergonomic handles to safely lift and remove old gaskets, silicone, and light corrosion from engine surfaces. Whether you’re servicing a motorcycle head, ATV cover, or small automotive component, clean mating surfaces are essential...

RUITONDA's 14-piece carburetor adjustment tool kit gives you the exact driver heads to fine-tune two-cycle small engines for smoother starts and more reliable idle. Whether you're a homeowner tuning a trimmer or a professional maintaining a fleet, this kit bundles the common splines, D-drivers,...