generic

These 50 black #8 SEMS Phillips trim screws are factory-style interior fasteners engineered to replace original OEM hardware across GM vehicles. If you need an exact-match set of interior screws for a restoration or repair, this kit supplies the same style used on assembly...

These are 1.375" x 24 threaded aluminum cone-shaped sealed end caps sold as a 12-piece kit designed to replace or protect cone fittings such as tire anti-theft cover ends. Compact, corrosion-resistant and machined for a smooth fit, this 12-piece set provides a ready supply...

This 10 amp panel-mount 12V on-board charger provides a convenient, weather-resistant way to charge and maintain 12V batteries for dump trailers, cars, boats, and RVs. Designed to install through a toolbox or dash panel, this compact charger lets you plug in an AC extension...

This OEM replacement kit pairs two quarts of 10W-30 synthetic blend motor oil with a 12 050 01-S style oil filter for routine small-engine oil changes. When your lawn mower, riding tractor, portable generator, or other outdoor power equipment calls for SAE 10W-30 and...

The Generic 110V–240V to 12V 15A 180W AC→DC adapter converts household mains power into a cigarette-lighter style 12V outlet so you can run portable car devices safely at home. This compact power converter translates universal AC input (100–240V, 50/60Hz) into regulated 12V DC with...

Complete 111-piece replacement screw kit for GM cars and trucks that supplies interior, exterior and engine-bay fasteners in chrome, black phosphate and stainless finishes. This universal bulk hardware set was curated to replace common #8 screw types used across many General Motors models —...

This 12V 6-amp automatic smart charger is a seven-stage battery maintainer and desulfator that charges, repairs, and preserves 12V lead-acid batteries for cars, motorcycles, lawn equipment, and marine use. Designed to combine fast charging with gentle long-term maintenance, this compact unit uses an MCU-controlled...

The 5-760X U-joint kit is a pair of 1310WJ inside-snap-ring universal joints for Dana 30 and Dana 44 front axle wheel ends with 1.188" bearing caps, sold as a pack of two with snap rings. This kit replaces worn or failed U-joints on select...

The 1405 carburetor is a 600 CFM, 4-barrel replacement designed to restore fuel delivery and throttle response on Edelbrock Performer Series-compatible V8 engines. This precisely cast aluminum carburetor replaces Edelbrock Performer 600 CFM square-bore units and is built for street and mild-performance applications that...

A direct-fit 1405 carburetor engineered as an Edelbrock Performer 600 CFM 4-barrel square-bore replacement with manual choke for classic V8 engines. This high-flow, aluminum-alloy 1405 replacement is designed to restore throttle response and reliable idling for engines that require a 600 CFM 4-barrel square-bore...

The Eastvolt 16" Rivet Nut Tool Kit is a heavy-duty hand rivet nut setter with a long non-slip handle, 15 interchangeable mandrels, and 180 rivnuts for fast, reliable blind nut installations. Designed for mechanics, fabricators, and DIYers who need a versatile, portable solution for...

The SWTsweter 16A Smart Car Battery Charger is a multi-chemistry 12V/24V charger, maintainer and desulfator with a 200-second booster mode designed to revive, maintain and quickly charge automotive and leisure batteries. This compact, feature-rich charger works with modern lithium chemistries (including 12.6V lithium-ion and...

The XKXKTkol 4-bay charger is a versatile smart charger that refills 18650 and many other rechargeable batteries quickly and safely while showing each cell's status on an LCD. This compact 4-slot charger accepts a wide range of rechargeable chemistries — including Li-ion, Ni-MH and...

High-flow 1906 4-barrel carburetor with a 650 CFM rating and electric choke, built as a satin-finish replacement compatible with Edelbrock AVS2 650 CFM square-flange systems. This replacement carburetor is a direct-fit option for vehicles using the 1906 AVS2 Series 650 CFM 4-barrel square-bore setup....

This is a foldable, expandable 2-gallon gas pouch from Generic designed to carry emergency fuel in a palm-sized, recyclable container. Lightweight and compact, this collapsible 2-gallon fuel pouch expands when needed and stows away flat for easy storage in a motorcycle compartment, scooter trunk,...

The ST Hitch Cover is a custom 3D‑printed, two‑tone hitch plug designed to protect and personalize 2‑inch receivers on Explorer ST and Edge models. This precision-crafted hitch cover blends function and style: it shields your 2‑inch receiver from dirt and moisture while adding a...

These are two red, universal 2-point golf cart seat belt pads and adjustable lap straps designed to replace or upgrade seat belts on most golf carts, go-karts, UTVs and similar vehicles. Upgrade your cart’s comfort and safety interface with this 2-pack of red lap...

Soft, adjustable 3-point seat belt pads with a replaceable lap strap provide added comfort and a secure fit for go karts, golf carts, UTVs, minivans and similar vehicles. These two replacement kits convert standard three-point harnesses into more comfortable, wearable systems by adding padded...

Two complete 2.50-10 off‑road tire and tube kits designed to fit 10" rims on 49cc–70cc dirt bikes, delivered with tire levers for fast replacement. This twin-pack pairs two 2.50x10 motocross tires with matching 2.50/2.75-10 butyl inner tubes and accessories, giving small-displacement riders a ready...

WETOOLPLUS 20V 0.7A Battery Charger is a drop-in slow-replacement charger made to match the original Hyper Tough ACG318W1U performance while prioritizing battery longevity. If you lost or broke your Hyper Tough 20V charger and want an affordable, properly matched replacement, this WETOOLPLUS unit fills...

The YHMOTO 22" detachable sissy bar is a bolt-on passenger backrest designed to add comfort, style, and quick-removal convenience to Harley Touring models from 2009–2025. If you're upgrading a Road King, Street Glide, Road Glide, Ultra, CVO or Limited model, this rear pad and...

Durable 22-foot battery cable harness designed to connect Harmar electric wheelchair lifts to a vehicle battery with plug-and-play ease. This heavy-duty wiring harness is made to replace or upgrade the battery connection on a range of Harmar lift models. Built with thick copper conductors...

High-traction off-road replacement tire and inner tube set sized 255 x 80 for 10-inch electric scooters with a 6-inch rim and 3-inch tread width. Upgrade worn or stock scooter tires with this new 255 x 80 rubber tire paired with a matching inner tube...

These two adjustable 3-point retractable lap belts provide a simple, universal upgrade to secure riders in go-karts, golf carts, SUVs, minivans and UTVs. Designed as a direct, no-fuss replacement or aftermarket addition, this pair of black retractable lap belts combines a compact retractor, a...

SIKUAI's 3-inch amber ABS bullet turn signal lenses are exact, impact-resistant replacements engineered to restore the original look and light clarity on pre-2004 Harley bullet-style housings. These two amber lenses are molded to match classic Harley Davidson bullet signals and are intended as direct...

These are two adjustable red 3-point seat belt pads that slide over retractable straps to add shoulder comfort and protect clothing in cars, vans, UTVs, golf carts and other vehicles. Upgrade hard, narrow seat belts with a simple, universal solution that softens contact and...

This listing is for two ready-to-install 3-wire tail light sockets designed to accept 1157 dual-filament bulbs for stop, turn and parking functions on a wide range of GM/Chevy models from the late 1960s through early 1990s. These replacement sockets are manufactured to ISO9001 standards...

These are two heavy-duty 3.00-12" (80/100-12) inner tubes with TR4 straight valve stems made for mini dirt bikes, pit bikes, and small off-road motorcycles. Keep a reliable spare on hand with this two-pack of thick natural-rubber inner tubes engineered for small off-road wheels. Built...

Compact 300W 110V-to-12V converter that powers 5kW and 8kW diesel air heaters from a household outlet for reliable heater operation in RVs, campers, and workshops. This compact power converter provides a simple way to run 12V diesel air heaters from any 110V AC socket....

The Midwest U041CP is a weatherproof 30-amp RV/EV power outlet panel that includes a 20-amp GFCI for added ground-fault protection in outdoor installations. This compact power box combines rugged construction with installer-friendly features to deliver reliable outdoor power where RVs, EV chargers, or auxiliary...

Replacement 3157 bulb holder socket that secures front turn signal and side light bulbs for select Jeep, Dodge, and Chrysler vehicles. This plug-and-play T25 3157 bulb holder is a direct-fit electrical socket designed to restore reliable front turn signal and side light connections on...

Professional 3-liter manual brake bleeder pump with a 1-liter collection bottle and four master cylinder adapters for fast, controlled brake-fluid changes and air removal. This professional-grade brake bleeder kit combines a high-capacity 3L hand pump, a 1L detachable bleed bottle, and four master cylinder...

Four molded door-handle storage inserts designed to fit Ford Escape models from 2020 through 2026, adding discreet, stable pockets for small items without modifying the car. These four plug-in storage boxes are a simple upgrade that tucks neatly into each door handle recess of...

The Generic 4.5 Gallon Drain Pan is a low-profile, heavy-duty plastic oil catch container with an easy-pour spout designed to capture and transfer up to 4.5 gallons (17 L) of engine oil cleanly and without spills. This durable oil drain pan simplifies routine maintenance...

Generically built for shop and DIY front-end repairs, this 5-in-1 ball joint separator kit contains five forged-steel pullers and a fitted carry case for removing ball joints, tie rods, pitman arms and steering linkages. This compact kit groups the most commonly used pullers and...

These five specialized disconnect pliers give you the right tool to release wiring plugs, terminals, hose clamps and fuel lines quickly and without damage. Whether you're wrenching in a home garage or fixing a roadside wiring issue, the Generic 5-piece Electrical Disconnect Pliers Kit...

Heavy-duty 54mm 6-point hub socket for 1/2" drives, engineered to remove and install wheel bearing locknuts on Toyota LandCruiser, Hilux and compatible Nissan Patrol models. This precision machined wheel bearing locknut socket is a dedicated tool for heavy 4x4 service and restoration work. Made...

This set is a 6-piece kit of 6-inch oval LED trailer tail lights combining red brake/tail illumination and white reverse LEDs for durable, weatherproof trailer lighting. Replace or upgrade multiple trailers or trucks with this six-light bundle designed for 12V DC systems. Each oval...

The Generic 6-Point Truck Wheel Bearing Locknut Socket Set (9850) is a 21-piece collection of 6-point, 3/4"-drive sockets mounted on a display board for quick, secure removal and installation of truck axle locknuts. This heavy-duty socket set was made to handle common truck wheel-bearing...

The Generic 637360 Temp Monitor Control Kit is a plug-and-play replacement control and sensor assembly designed to protect Norcold-style RV refrigerators from overheat and pressure events. This kit combines a temperature-control relay, robust steel sensors, and secure snap-fit connectors to restore cooling-unit protection on...

BR-67255 is a 650 CFM, 4-barrel performance carburetor built on the 4150 square-bore flange pattern, featuring a mechanical secondary and electric choke for reliable throttle response and easier starting. This carburetor is engineered as a direct-fit, high-flow replacement for applications that use Holley-style 4150...

The BR-67255 is a 4150-pattern 4-barrel, 650 CFM replacement carburetor built for mechanical-secondary, double-pumper setups with an electric choke for dependable starting and tuning flexibility. This high-flow 650 CFM carburetor is designed as a direct-fit style replacement for applications using a 4150 square bore...

High‑flow 650 CFM 4‑barrel carburetor built as a direct replacement for 4150 square‑bore mechanical‑secondary setups. This BR‑67199 carburetor is a performance‑oriented replacement designed for racers and hot‑rod builders who need a dependable, high‑flow 4150‑style carb with mechanical secondaries and dual fuel inlets. Machined from...

These two 66390 air cleaner stud adapters convert a 1/4"-20 female air cleaner stud to a 5/16"-18 male thread in a compact 0.92" length for a secure, rust-resistant fit. When you need to mount an air cleaner or carburetor but the existing stud and...

Universal 6AN 70" stainless steel braided PTFE transmission cooler hose kit engineered to connect aftermarket or stock coolers to a wide range of GM and Ford automatic and manual transmissions. This professional-grade hose kit supplies a complete, corrosion-resistant line with AN6 fittings for installations...

Complete AN6 transmission fluid line kit with two 52" stainless-steel braided PTFE hoses and full AN6-to-NPT/AN6 swivel fittings for universal transmission cooler installs. This 6AN transmission oil cooler hose kit supplies everything needed to route transmission fluid to an auxiliary cooler or to replace...

A single 7-inch chrome semi-sealed glass headlight housing that accepts H4/HB2/9003 bulbs to convert or replace high/low beam fixtures while preserving a classic round look. This premium 7-inch headlight housing combines high-transparency glass, a chrome finish, and precision sealing to give vintage and modern...

7-inch round LED glass headlight conversion kit with included H4 (HB2/9003) bulbs—chrome housing, PMMA lens, and plug-and-play fit for H6024 sealed-beam applications. Replace a worn sealed-beam headlight with a modern LED option that fits the common 7" (H6024) round opening. This conversion kit combines...

These are factory-quality 7 mm #8 (M4.2-1.41) black phosphate trim screws sold as a set of 25 and made to directly replace GM Part# 11503396 for interior and exterior trim, splash shields and engine bay panels. Designed as exact-fit OEM replacements, these screws match...

These two-piece 82mm (hood) and 74mm (trunk) blue-white roundel emblems are tool-free replacement center caps that refresh your vehicle’s exterior with a classic, fade-resistant finish. Swap aging or damaged wheel and trunk badges with this pair of OEM-style 82mm and 74mm roundels built from...