-
Vendor:IWISS
IWISS iCrimp Deutsch Terminal Extraction Kit — 3-Piece DT-Series for 14–24 AWG Solid Contacts, Stainless Tips & Knurled Handles
The IWISS iCrimp Deutsch DT-Series is a three-piece terminal extraction kit engineered to remove Deutsch solid contacts from 14–24 AWG wires quickly and without damaging terminals. When you need to service sealed Deutsch connectors used on vehicles and heavy equipment, ordinary picks and screwdrivers...- $60.86
- $60.86
- Unit price
- per
-
Vendor:Mejiao
Mejiao Camshaft & Injection Pump Pulley Holder Wrench for Honda & Toyota — Adjustable 19–190 mm, Hardened Steel
Mejiao's Universal Pulley Holder is a heavy‑duty, adjustable wrench that locks camshaft sprockets and injection pump gears in place so you can safely loosen or tighten timing bolts. This tool is built for engine timing work on a wide range of overhead‑cam (OHC) vehicles,...- $56.69
- $56.69
- Unit price
- per
-
Vendor:Bonbo
Bonbo 9‑Pin Axle Nut Socket for GM Silverado/Sierra 2500/3500 (2020+) — 1/2" Drive, Black Oxide
Bonbo 31510 is a hardened 9‑pin axle nut socket engineered to remove and install hub nuts on 2020‑and‑newer GM Silverado and Sierra 2500/3500 trucks with 11.5" or 12" dual rear wheel hubs. This precision socket is made for professionals and home mechanics who work...- $60.86
- $60.86
- Unit price
- per
-
Vendor:Lisle
Lisle Magnetic Soldering Clamp – 55000 detachable helping hands with hex magnetic base and alligator clips
The Lisle 55000 Magnetic Soldering Clamp is a detachable, magnetized helping-hands tool that secures wires and small parts for hands-free soldering and detail work. When you need steady, reliable support while soldering small components, the Lisle 55000 provides flexible positioning and a strong magnetic...- $55.64
- $55.64
- Unit price
- per
-
Vendor:LumiMokki
LumiMokki Car Wash Mop Kit — 62-Inch Extendable Handle with Rotating Chenille Head & 8-Piece Set
The LumiMokki 62-Inch Car Wash Mop Kit is an extendable, rust-proof car and truck cleaning system with a rotatable chenille head and eight-piece accessory set for flexible, scratch-free washing. If you need a single tool to reach roofs, windshields, bumpers and RV panels without...- $56.69
- $56.69
- Unit price
- per
-
Vendor:Asweir
Asweir Marble Polishing Kit 4-inch 12pc 50–6000 Grit Diamond Pads — Wet/Dry with Drill Adapter
Asweir Marble Polishing Kit is a complete 12-piece set of 4-inch diamond polishing pads and accessories designed to restore gloss to granite, marble and other stone surfaces. This kit bundles eight diamond sanding pads from coarse to ultra-fine grit, two wool felt finishing pads,...- $56.69
- $56.69
- Unit price
- per
-
Vendor:NYXOVA
NYXOVA 14" Coil Spring Compressor Kit - 14in Forged Steel with Safety Hooks, Fits MacPherson Springs
NYXOVA 14" Coil Spring Compressor Kit is a heavy‑duty tool set designed to safely compress and remove MacPherson coil springs for strut, shock, and spring service on cars and light trucks. This professional-grade coil spring compressor delivers the reach, strength, and safety features needed...- $71.29
- $71.29
- Unit price
- per
-
Vendor:Aupoko
Aupoko R1234YF Refrigerant Charge Hose Kit with Gauge — 40cm Rubber Hose, 90° Auto‑Shutoff Coupler
Aupoko R1234YF Refrigerant Charge Hose Kit with Gauge is a ready-to-use charging hose assembly designed to refill R1234YF systems safely and accurately for both vehicle and home air-conditioning units. This compact kit combines a calibrated pressure gauge, a self-sealing 1/2" left-hand can tap, and...- $56.69
- $56.69
- Unit price
- per
-
Vendor:Okllen
Okllen magnetic parts tray set — 6 stainless steel tool trays + 2 small trays, extra-strong magnets & ABS-coated non-scratch base
Okllen Set of 6 Small Magnetic Parts Trays is a stainless-steel organizer kit with extra-strong magnets that securely hold nuts, bolts, screws and small metal parts while you work. Keep small metal components from rolling away or getting mixed up with a set designed...- $56.69
- $56.69
- Unit price
- per
-
Vendor:besttruck
besttruck crankshaft pulley holding tool — Upgraded 10198A fit for 3.0L/3.2L/3.6L engines, 42mm anti-pop extension
besttruck's Upgraded 10198A crankshaft crank pulley wrench holder tool secures the crank pulley so you can safely loosen or tighten the retaining bolt on 3.0L, 3.2L and 3.6L engines. This heavier-duty crankshaft pulley holding tool replaces part 10198A and is made to fit a...- $69.21
- $69.21
- Unit price
- per
-
Vendor:ANKHOH
ANKHOH Travel Case for Anker Prime 3‑in‑1 Wireless Charging Station — Black EVA Shell, Padded Divider
Compact, protective travel case custom-made to store and carry the Anker Prime 3-in-1 Wireless Charging Station and its core travel accessories. This black ANKHOH travel case is built to keep your Anker Prime foldable charger, 45W power adapter and USB‑C cable together, protected and...- $56.69
- $56.69
- Unit price
- per
-
Vendor:PEATOVIE
PEATOVIE Camshaft Holding Tool Set for Ford V8/V10 — Pack of 2, 1997–2002 4.6L/5.4L/6.8L Alignment Fixtures
PEATOVIE camshaft holding tool (pack of 2) secures camshafts for accurate timing during repairs on compatible 1997–2002 Ford V8/V10 engines. This pair of camshaft locking fixtures is designed to hold camshafts steady while you service the timing chain, replace the head gasket, or perform...- $67.12
- $67.12
- Unit price
- per
-
Vendor:Performance Tool
Performance Tool Windshield Removal Kit W86565 — 72 ft Braided Steel Wire, T-Handles & Hook
Performance Tool W86565 is a complete windshield removal kit that uses braided steel wire, two T-handle grips and a hook insertion tool to cut through adhesive and extract auto glass safely and efficiently. This kit is built for automotive technicians, body shops and experienced...- $59.82
- $59.82
- Unit price
- per
-
Vendor:DASBET
DASBET Harmonic Balancer Installer Kit — 5‑Piece Long‑Reach Crank Pulley Tool with Bearing Drive Nut, Fits V6/V8
The DASBET Long Reach Crank Pulley Underdrive Pulley Damper Installation Tool is a 5-piece harmonic balancer installer kit that lets you seat crankshaft dampers smoothly and without thread damage using four long-reach adapters plus a bearing-equipped drive nut. This compact kit is created for...- $69.21
- $69.21
- Unit price
- per
-
Vendor:ITEQ
ITEQ Protective 17mm Wheel Lug Nut Socket for Mercedes – 85mm 1/2" Drive with Red Protective Sleeve
Heavy-duty 1/2" drive 17mm impact socket designed to remove and install Mercedes "flower head" (convex) lug bolts without scratching wheels. Designed for late-model Mercedes and similar European vehicles that use 17mm convex or flower-head lug bolts, the ITEQ Protective Wheel Lug Nut Socket combines...- $60.86
- $60.86
- Unit price
- per
-
Vendor:weyleity
weyleity Valve Stem Seal Remover & Installer Kit — 11‑Piece Alloy‑Steel Set with Case
Compact 11-piece valve stem seal remover and installer set that includes precision machined adapters and durable alloy-steel tools for accurate, repeatable valve seal replacement on overhead cam engines. This weyleity kit is designed to simplify valve stem seal jobs by combining targeted seal drivers,...- $67.12
- $67.12
- Unit price
- per
-
Vendor:GEARWRENCH
GEARWRENCH 16 oz Soft-Face Hammer GWHST16 — Steel Handle, Interchangeable Non-Marring Faces for Auto & Industrial Work
GEARWRENCH GWHST16 is a 16 oz soft-face hammer with a steel core and interchangeable non-marring faces designed for precision work and heavy-duty durability. This versatile soft tip hammer combines a rugged steel handle with replaceable soft and medium-hard striking faces to tackle delicate alignment...- $59.92
- $59.92
- Unit price
- per
-
Vendor:zozoye
zozoye flywheel puller 50mm x 1.5 RH female — Suzuki & Arctic Cat fit, hardened steel, precision machined
A heavy-duty 50mm x 1.5 RH female flywheel puller from zozoye engineered to remove flywheels on a wide range of Suzuki motorcycles, ATVs and Arctic Cat UTVs quickly and safely. If you work on Suzuki or Arctic Cat engines, having the proper puller prevents...- $67.12
- $67.12
- Unit price
- per
-
Vendor:HTLAKIKJ
HTLAKIKJ EV Charger Holder Metal Wall Mount for Controller Boxes up to 4.76×2.95 in — Adjustable, Weather-Resistant
HTLAKIKJ EV Charger Holder is a heavy-duty adjustable metal wall mount that secures, organizes, and protects most EV charging controller boxes up to 4.76 x 2.95 inches. Keep your EV charging area tidy and protect the charger from dangling strain with this steel mounting...- $56.69
- $56.69
- Unit price
- per
-
Vendor:Watris Veiyi
Watris Veiyi Wheel Width Caliper — Compact ABS Tire/Rim Gauge, Durable Lightweight
The Watris Veiyi Car Tire Caliper is a compact, handheld wheel-width gauge that quickly and precisely measures tire and rim widths for balancing and fitment checks. Whether you're a home mechanic, tire shop technician, or fleet manager, this lightweight wheel caliper gives a fast,...- $56.69
- $56.69
- Unit price
- per
-
Vendor:3mirrors
3mirrors Aluminum Oil Filter Cap Wrench Set for Toyota Lexus Scion — 2pc 64mm, 4- & 6-Tooth Durable Fit
3mirrors 2-piece aluminum oil filter cap wrench set removes and installs 64mm cartridge-style oil filter housings on Toyota, Lexus, Scion and many compatible vehicles quickly and without damaging the plastic cap. This pair of precision-machined, thick-wall aluminum cap wrenches includes a 4-tooth large and...- $60.84
- $60.84
- Unit price
- per
-
Vendor:Robinair
Robinair Pocket Dial Thermometer 0°–220°F, 1" Face — Compact HVAC & Automotive Spot-Check, Pocket-Clip Case
The Robinair 10597 Pocket Dial Thermometer is a compact, adjustable dial gauge designed to read vent temperatures from 0° to +220°F with a clear 1-inch face and protective pocket-clip case. Compact and built for field use, this pocket dial thermometer helps technicians and homeowners...- $56.69
- $56.69
- Unit price
- per
-
Vendor:Orion Motor Tech
Orion Motor Tech camshaft timing tool kit for 1.4–1.8L Chevy Opel engines — includes 41 mm water pump wrench & locking tools
Orion Motor Tech's OMT Engine Camshaft Timing Tool Kit is a complete alignment and locking set with a 41 mm water pump wrench designed to hold camshafts, crankshafts, tensioners, and sprockets securely while you service 1.4–1.8L Chevrolet, Opel/Vauxhall, Fiat, Alfa Romeo, and Saab engines....- $67.12
- $67.12
- Unit price
- per
-
Vendor:Lettry
Lettry Tire Valve Stem Core Tool Kit 38-Piece — TR412/TR413/TR414 Repair Kit, Portable
The Lettry 38-piece Tire Valve Stem Core Tool Kit is a compact, all-in-one set for removing, installing and maintaining TR412/TR413/TR414 valve cores on cars, light trucks, trailers, ATVs and lawn equipment. This kit groups every frequently used valve tool into a single, portable package...- $56.69
- $56.69
- Unit price
- per
-
Vendor:NYXOVA
NYXOVA 5-Piece Ball Joint Separator Set — Pickle Fork Kit with Interchangeable Handles, Chrome-Plated 45# Steel
NYXOVA 5-piece ball joint separator set is a heavy-duty pickle fork kit with interchangeable forks and striking handles made from forged, heat-treated 45# steel for removing ball joints, tie rods, and pitman arms. When you need dependable separation power on suspension and steering components,...- $70.38
- $70.38
- Unit price
- per
-
Vendor:EONON
EONON Bluetooth OBD2 Diagnostic Adapter for Android Stereos — V0056, Live PIDs & Code Reader
The Eonon V0056 is a Bluetooth OBD2 adapter that connects to EONON Android head units so you can read engine diagnostics and live sensor data on your car stereo. Plug-and-play and designed for in-dash Android radios, the V0056 turns your compatible EONON head unit...- $56.50
- $56.50
- Unit price
- per
-
Vendor:YOOREAL
YOOREAL Battery Meter & Hour Gauge 12/24/36/48/72V — 10-LED Charge Indicator, 0–999,999h Log
YOOREAL 12/24V 36/48V 72V Golf Cart Battery Meter is a plug-in battery level indicator and hour meter that displays remaining charge with a 10-LED bar and logs up to 999,999 operating hours. Keep track of your golf cart or other lead-acid powered vehicle’s charge...- $57.94
- $57.94
- Unit price
- per
-
Vendor:Purthog
Purthog LED Garage Parking Aid — Adjustable Wall-Mounted Sensor with Red/Yellow/Green Display, USB or AAA Power
Purthog 2026 Upgraded LED Garage Parking Aid is an adjustable wall-mounted sensor that uses red, yellow and green LED lights to show how close your vehicle is and triggers a saved stop point so you park in the exact spot every time. Designed for...- $60.63
- $60.63
- Unit price
- per
-
Vendor:Life Miracle
Life Miracle Nano Towels Minis travel cleaning cloths, 4-pack 8x8 in Gray — reusable Nanolon microfiber, streak-free with water
Life Miracle Nano Towels Minis are compact, 8x8-inch next-generation cleaning cloths that remove dust, grease and streaks from hard surfaces using only water. These travel-size Nano Towels use an advanced Nanolon fiber that lifts and traps liquids, dirt and grime without detergents or disposable...- $60.67
- $60.67
- Unit price
- per
-
Vendor:Krenlory
Krenlory automatic slack adjuster wrench 7/16" deep hex, ratcheting with 14.75" dipped handle
The Krenlory 7578 is a 7/16" automatic slack adjuster wrench built to make precise brake adjustments on heavy-duty trucks and trailers with Haldex-style slack adjusters. This durable ratcheting wrench is engineered for technicians who need reliable reach and repeatable adjustments on automatic and many...- $62.32
- $62.32
- Unit price
- per
-
Vendor:Esakoya
Esakoya Flare Tool Kit — Double & Single Flares, 5-Adapter Set, Heat-Treated Steel
The Esakoya Double & Single Flare Tool Kit is a complete, heat-treated steel set that creates reliable single and double flares on brake and soft-metal tubing. Whether you're repairing vehicle brake lines, tightening HVAC connections, or fabricating hydraulic runs, this kit bundles the core...- $66.08
- $66.08
- Unit price
- per
-
Vendor:Tornador
Tornador Mini Cone Replacement TM-018 for Z-007 — Stainless-Steel Lined, Durable Direct-Fit
The Tornador Mini Cone TM-018 is a direct replacement cone for the Z-007 that adds a stainless-steel lined interior for greater durability and easier cleaning. If your Tornador Mini Z-007 cone has worn, become clogged, or you simply want an upgrade built to last,...- $56.60
- $56.60
- Unit price
- per
-
Vendor:SAFELIFE
SAFELIFE Tire Deflators 4‑Pack Adjustable 10–30 PSI Off‑Road Brass Deflator Kit, Automatic Shutoff
SAFELIFE Automatic Tire Deflators are a four-piece, presettable kit that lets you lower tire pressure from 10 to 30 PSI automatically — no valve core removal or constant monitoring required. Designed for overlanders, off‑road enthusiasts and anyone who needs fast, consistent air‑down on mud,...- $62.76
- $62.76
- Unit price
- per
-
Vendor:Yuesstloo
Yuesstloo Timing Tool Kit for Ford/Lincoln 2.0L–2.3L EcoBoost (303-748/303-1521/303-1565) Hardened Steel Alignment Set
Yuesstloo 303-748, 303-1521, 303-1565 Timing Tool Kit is a professional alignment set designed to lock and position crankshaft and camshafts precisely on Ford and Lincoln 2.0L and 2.3L EcoBoost engines. This compact timing tool kit contains the crank timing pin, camshaft alignment tool, and...- $59.34
- $59.34
- Unit price
- per
-
Vendor:SHALL
SHALL grease gun coupler 1/8" NPT — 6-jaw quick-release, 10,000 PSI, slim 0.55" tip for recessed zerks
SHALL Grease Gun Coupler is a reinforced 6-jaw quick-release grease tip that locks tightly to 1/8" NPT/Zerk fittings for high-pressure, no-leak lubrication. This precision coupler combines a compact profile with a patented six-jaw locking mechanism and aviation-grade sealing gaskets to deliver a reliable, leak-resistant...- $61.90
- $61.90
- Unit price
- per
-
Vendor:Beaquicy
Beaquicy washer repair kit - 285785 clutch, 285753A reinforced motor coupling & 4x 80040 agitator dogs (direct-drive, metal/ABS)
Beaquicy's kit bundles the 285785 washer clutch, a reinforced 285753A motor coupling and four 80040 agitator dogs to restore spin, agitation and reliable direct-drive washer performance. This comprehensive repair set is made for beltless, direct-drive top-load washers. It supplies the clutch assembly that controls...- $58.73
- $58.73
- Unit price
- per
-
Vendor:X.Store
X.Store HVAC Schrader Valve Core Remover/Installer Kit — Dual 1/4" & 5/16" Tools, Magnetic Tip & Bypass Port
X.Store Professional dual-size valve core remover/installer repairs Schrader valve leaks on HVAC systems without releasing refrigerant. This compact kit contains CNC-machined 1/4" and 5/16" core tools, a magnetic retrieval tip, and a bypass port to change leaking valve cores while preserving system charge for...- $58.77
- $58.77
- Unit price
- per
-
Vendor:Mtsooning
Mtsooning Air Conditioner Ball Valve Adapter 2PCS Brass 1/4-inch — Durable, Leak-Resistant HVAC Connectors
Mtsooning 2PCS Air Conditioner Ball Valve Adapter is a pair of 1/4" SAE brass HVAC connectors that let you isolate and control refrigerant lines reliably during service and pressure testing. These brass ball valve adapters are built for technicians and DIYers who need a...- $58.77
- $58.77
- Unit price
- per
-
Vendor:VueSparkWo
VueSparkWo EV Charger Cover for Tesla & Level 2 Wall Mounts — Outdoor Waterproof, UV-Resistant with Adjustable Straps
Heavy-duty outdoor cover designed to keep Tesla and most Level 2 wall-mounted EV chargers dry, clean, and protected from weather year-round. This VueSparkWo EV charger cover is a weatherproof shelter made to fit Tesla Wall Connector units and many other Level 2 wall-mounted charging...- $55.85
- $55.85
- Unit price
- per
-
Vendor:XTPTFABS
XTPTFABS OBD2 Cable for SCT X4 Tuner — 59in Black Replacement, Plug-and-Play Power & Data
The XTPTFABS OBD2 cable is a 59-inch replacement lead designed to connect your SCT X4 (xCalibrator X4) tuner to a vehicle’s OBD‑II port for tuning, diagnostics, and data communication. This replacement cable restores the physical link between an SCT X4 handheld tuner and a...- $58.77
- $58.77
- Unit price
- per
-
Vendor:Lisle
Lisle A/C Disconnect Tool for Toyota — Double-Ended 1998+ Plastic Quick-Connect Release, U.S.-Made
Lisle 39310 is a double-ended A/C disconnect tool designed to release plastic quick-connect fittings on most 1998 and newer Toyota air conditioning lines quickly and without damage. This compact, U.S.-made service tool lets technicians and DIYers disengage high- and low-pressure Toyota A/C connector collars...- $54.96
- $54.96
- Unit price
- per
-
Vendor:johntruck
johntruck Clutch Head Bit Socket Set for Chevy & GM Cars — 4-Piece 3/8" Drive (5/32"–5/16") Chrome-Vanadium
johntruck 4 Pack Clutch Head Bit Socket Set is a four-piece 3/8" square-drive kit made to engage eight-shaped clutch-head screws commonly found on GM cars and trucks. This compact set brings four clutch-head bit sockets in common imperial sizes so you can remove and...- $60.86
- $60.86
- Unit price
- per
-
Vendor:Lyhubmh
Lyhubmh Lug Wrench 23" Extended 4-Way Tire Iron — Heavy-Duty, Swivel Handle & Detachable
The Lyhubmh 23" Extended Lug Wrench is a heavy-duty, four-way tire iron that extends for extra leverage, features a 360° swivel handle, and breaks down for compact storage. When you need dependable torque to remove or tighten wheel nuts, this multi-piece lug wrench offers...- $63.99
- $63.99
- Unit price
- per
-
Vendor:QWORK
QWORK Spark Plug Boot Pliers Set — Long-Reach Carbon-Steel Tool with Non-Slip Ergonomic Grip
QWORK Spark Plug Boot Removal Pliers Set is a long-reach, carbon-steel tool designed to remove and install spark plug wire boots safely without damaging rubber heads. Keeping spark plug boots intact is essential for reliable ignition and simple maintenance. The QWORK set combines a...- $55.60
- $55.60
- Unit price
- per
-
Vendor:ATOTO
ATOTO Bluetooth OBD-II Car Diagnostic Scanner AC-4450 — Compatible with V10/X10/A5/A6/S8/P9/P10, Torque App Ready
The ATOTO AC-4450 is a Bluetooth OBD-II scanner that plugs into your car’s diagnostic port and wirelessly feeds vehicle data to compatible ATOTO Android head units and the Torque app. The AC-4450 is a compact plug-and-play OBD-II/OBD2 adapter made to work with select ATOTO...- $62.76
- $62.76
- Unit price
- per
-
Vendor:Motion Pro
Motion Pro Hydraulic Brake Bleeder 08-0143 — One-Way Check Valve, Compact Motorcycle Fit
Motion Pro 08-0143 is a one-way hydraulic brake bleeder that lets brake fluid and trapped air escape while preventing air from flowing back into the system. The Motion Pro 08-0143 hydraulic brake bleeder is a compact service tool designed for use on motorcycle and...- $55.04
- $55.04
- Unit price
- per
-
Vendor:Wokape
Wokape Powder Coating Plug Kit 105‑pc — High‑Temp Silicone Tapered Plugs & PET Masking Tape, Organized Case
Wokape’s 105‑piece kit supplies high‑temperature silicone tapered plugs plus four sizes of PET masking tape to protect holes, threads and edges during powder coating, plating, blasting or hydro dipping. This all‑in‑one assortment combines reusable, heat‑resistant silicone rubber stoppers in multiple sizes and colors with...- $56.21
- $56.21
- Unit price
- per
-
Vendor:Worldity
Worldity Windshield Installation Tools Kit — 12-Piece Set with 10 Setting Rods, Stainless Steel Tips
Worldity 12-piece windshield installation tools kit includes a windshield tool, a cotter pin puller, and ten windshield setting rods designed for installing and removing glass seals without damaging trim. This compact kit gathers the common hand tools technicians and DIYers use to install window...- $59.40
- $59.40
- Unit price
- per
-
Vendor:Yuudar
Yuudar Round Rubber Lift Pads 4PCS — 120mm Diameter, 15mm Thick Heavy-Duty Arm Pads for Car Lifts
Yuudar 4PCS Round Rubber Lift Pads are thick, durable 120mm rubber arm pads designed to protect vehicle lifting points and provide stable support on most car lifts and hoists. These round rubber lift pads offer a simple, low-cost way to extend the life of...- $56.69
- $56.69
- Unit price
- per
-
Vendor:GZKEFEIS
GZKEFEIS Anode Rod Socket Wrench Kit — 1-1/16" & 1-3/16" Short 6-Point Sockets, 1/2" Drive Chrome Vanadium
GZKEFEIS Anode Rod Socket Wrench Kit is a two-socket set (1-1/16" and 1-3/16") made from chrome vanadium for quick, damage-free powered or sacrificial anode rod installation and removal. Keep water heater maintenance fast and secure with a compact socket set designed specifically for anode...- $56.69
- $56.69
- Unit price
- per
Get the guides first
Seasonal driving guides for Canada and a heads-up when new stock lands. No spam, unsubscribe any time.
















































