Transmission & Drivetrain

WIT WHATEVER IT TAKES TRANSMISSION PARTS' Heavy Duty Universal Transmission Mount secures GM rear-wheel-drive transmissions (TH350, TH400, 700R4, 4L60E, 4L80E) with a durable, adjustable design built to meet or exceed OEM specifications. This universal transmission mount is engineered for broad compatibility across most GM...

The APSG Shift Lever Shaft Seal Tool is a complete installer and removal kit that lets you replace the manual shaft (shift lever) seal on many GM and Allison transmissions quickly—without draining the transmission fluid. This compact, purpose-built tool includes a genuine TIMKEN replacement...

JAVIK 3235616/3235500 is a 3-piece replacement U-joint kit built to restore front and rear propeller shaft performance on compatible Polaris RZR and Ranger models. This heavy-duty U-joint set replaces worn or damaged universal joints on a wide range of Polaris ATVs and UTVs, covering...

MOOG 270 Greaseable Super Strength universal joint is a heavy-duty, greasable driveshaft U-joint engineered to restore drivetrain strength and extend service life on Ford F-150 models that use this fit. This MOOG Super Strength® universal joint combines reinforced materials, precision manufacturing and a greasable...

Bojo Tools OST9 Heavy-Duty 9-piece O-ring and seal removal kit delivers durable, chemical-resistant plastic picks and scrapers designed to safely extract seals, O-rings and gaskets without scratching sensitive surfaces. Whether you work on automotive fuel systems, hydraulic fittings, HVAC components or small engine maintenance,...

JDMSPEED's automatic transmission shift lever replaces worn or broken factory levers to restore smooth, reliable gear selection on compatible Ford and Lincoln trucks and vans. This direct-fit replacement lever (part number 905-109 and many OEM cross-references) combines a metal core with ABS plastic trim...

TUELETFU Steering Gear Kit is a complete replacement steering sector assembly designed to restore precise steering on compatible John Deere D-series riding mowers. If your John Deere D100–D170 series mower is showing loose steering, grinding noises, or uneven steering response, this aftermarket kit provides...

The A-Premium Automatic Transmission Fluid Filter with Pan Gasket is a direct-fit replacement filter and gasket engineered to protect 62TE transmissions by screening debris and helping maintain fluid flow. This A-Premium kit combines a precision-molded transmission filter and a matching pan gasket sized at...

SEHNSUCHT Driver Pulley Replacement is a 6" diameter, 3/4" bore iron torque-converter driver designed to replace Comet 30-series clutches on 6.5HP (212cc) go karts, mini bikes and similar engines. This replacement driver wheel is engineered for machines using a straight 3/4" (19 mm) crankshaft...

Camotokiit Super Carrier Shim Kit is a 23-piece steel shim assortment engineered to speed up differential bearing preload and pinion depth adjustments on Ford 8.8" and a wide range of GM rear ends. The Super Carrier Shim Kit combines multiple shim thicknesses into one...

DVPARTS Steering sector gear plate with pinion (part 7171550) restores precise steering on compatible lawn tractors and riding mowers. This replacement steering sector plate and pinion assembly from DVPARTS is designed to match OEM fit and function for a wide range of MTD-family and...

A hardened steel remover/installer kit that extracts and seats shifter shaft seals on Chrysler 727/904 and 46/47/48 RE/RH transmissions without dropping the transmission. This BIGLKNM transmission shifter seal remover/installer is engineered for service technicians and DIYers working on Dodge, Plymouth, and Chrysler vehicles that...

TAKPART Universal Split CV Joint Boot Kit is a stretchable, cut-to-fit replacement gaiter that repairs constant velocity joints without removing the joint, compatible with shafts 19–35mm and CV joints 56–110mm. When a torn CV boot starts leaking grease, the TAKPART split boot kit gives...

GLOCRORET's 3/4"-36 spline x 3/4" double-D universal steering shaft is a compact, black-coated U-joint made from 40Cr alloy steel for reliable drivetrain connection in custom and replacement steering applications. This precision universal joint pairs a 3/4"-36 spline input with a 3/4" double-D output and...

RABROPAR's 3/4" DD × 3/4" DD powder-coated universal steering shaft is a single-piece coupler designed to join two double-D steering splines for reliable, compact steering linkage. This heavy-duty universal joint shaft provides a short, corrosion-resistant connection for aftermarket steering columns and quick-ratio setups. Built...

ICT Billet's billet aluminum speedometer plug for the TH400 (part 551908) fills the speed sensor port on Turbo 400 transmissions when you use a GPS or don’t need an electronic speed output. This machined plug is designed specifically for Turbo 400 (TH400) transmissions used...

ARP 129-0901 is a complete hex-head bellhousing bolt kit engineered to securely fasten GM V6 and V8 bellhousings with durable, precision-made hardware. This bolt set supplies the correct length and strength fasteners for many GM V6 and V8 bellhousing applications. ARP manufactures these components...

WLFINKMO's stainless-steel transfer case linkage kit replaces the weak factory 'Z' connecting rod to stop shifter clunking and restore reliable 4WD engagement on 1986–2001 Jeep Cherokee XJ and Comanche MJ models. If your XJ or MJ is showing a loose or noisy shifter, intermittent...

Reeoutdoor's 6R80 transmission filter with gasket kit replaces your factory filter and pan seal to help maintain clean transmission fluid and consistent flow in compatible Ford and Lincoln models. This complete replacement kit includes a purpose-built 6R80 transmission filter and a matching pan gasket...

A-Premium's Automatic Transmission Fluid Filter with Pan Gasket is a direct-fit replacement that captures debris and seals the transmission pan for reliable fluid protection on compatible Toyota, Scion, and Pontiac Vibe models. This kit combines a precision-molded transmission filter and a matching pan gasket...

The ApplianPar Transmission Dual Control Shift Lock Up Solenoid is a direct-fit replacement solenoid designed to restore proper torque converter lock-up and shift control in compatible Honda and Acura automatic transmissions. Built to match the fit and function of original equipment for a range...

AIPICO Rubber Shifter Boot 80668 is a direct-fit aftermarket replacement designed to protect and extend the life of B&M Megashifter assemblies. This flexible rubber boot restores a clean seal around the shift lever, keeping dust, moisture, and road debris away from the shifter mechanism...

The X4XZ Transfer Case Linkage Kit (OE# WZCM12901) is a direct-fit stainless-steel replacement that restores crisp transfer-case shifting for 1986–2001 Jeep Cherokee XJ and Comanche MJ models. If your Jeep's transfer-case shifter feels sloppy, clicks, or rattles when shifting into 4-wheel modes, worn factory...

Suspenix transmission cooler line fittings are a direct-fit replacement connector kit that stops common radiator-to-transmission leaks on many GM models. These aluminum transmission cooler line fittings replace the stock connectors at the bottom of the automatic transmission where the cooler lines join the radiator....

A-Premium Automatic Transmission Fluid Filter with Pan Gasket is a direct-replacement transmission filter kit designed to trap debris, protect valve bodies, and help maintain smooth shifting in compatible Toyota and Scion automatics. Keeping transmission internals clean is one of the simplest ways to extend...

MIKODA's billet aluminum column shift linkage kit replaces worn or broken factory linkages to restore precise, adjustable column-to-transmission shifting on compatible GM automatic transmissions. This adjustable replacement kit is designed for Chevrolet, GMC, Buick and Pontiac vehicles that use GM transmissions such as TH200,...

eosorssa shifter boot and retainer bezel kit replaces worn factory parts on Jeep TJ Wranglers (1997–2004), sealing the gearbox area to keep out dust and moisture while restoring a clean interior finish. Designed as a direct-fit aftermarket replacement for Jeep TJ models from 1997...

The A ABIGAIL 12677836 oil pressure sensor with red socket is a direct-fit replacement sensor assembly designed to monitor engine oil pressure and relay accurate readings to your vehicle’s electronics. This replacement oil pressure sensor kit includes the sensor, a protective filter, and a...

The FLEXX BOOT FB3000 Small Shaft Universal CV Boot is a flexible, durable replacement boot designed to repair CV joints on 19–24mm shafts without removing the axle. When a torn or cracked CV boot threatens grease loss and joint contamination, the FB3000 offers a...

The BushingFix TB1Kit is a complete repair kit that replaces worn automatic transmission shift cable bushings so your shifter operates smoothly again. If your vehicle’s gear selector feels loose, makes clunky motions, or struggles to find gears, the culprit is often a worn bushing...

The Spicer 5-153X is a greasable 1310-series outside-snap-ring universal joint kit engineered for reliable driveline service and straightforward maintenance. Built to Dana/Spicer standards, this universal joint kit supplies OEM-style performance for light-duty automotive driveshafts. It combines forged, heat-treated crosses, hardened bearing cups, and nitrile...

The BushingFix Si2Kit is a complete, patented repair kit that replaces worn automatic transmission shift cable bushings to restore smooth shifting without swapping the entire cable. If your vehicle’s gear selector feels loose, sticks, or jumps out of gear, the problem is often a...

The Manymiba 8L45/8L90 transmission filter and gasket kit is a direct-fit replacement (fits GM part numbers 24274402 / 24295812 / TF922) designed to restore fluid flow and protect internal transmission components for select Chevrolet, GMC, and Cadillac models. When a transmission filter becomes clogged...

The Aumzong 905-109 black automatic transmission lever is a direct-fit replacement shifter for many 1997–2006 Ford F-series, Expedition, and Lincoln Navigator models, engineered for reliable operation and corrosion resistance. Designed to restore smooth shifting and original equipment fitment, this Aumzong replacement gear shifter lever...

BILITOOLS 4PCS Transmission Fill Tool is a complete aluminum and zinc‑alloy service kit designed to drain, refill and service Mercedes 9G‑Tronic transmissions safely and accurately. This compact kit brings together four purpose‑built tools so you can perform a transmission fluid change on Mercedes‑Benz models...

The BushingFix BP1Kit is a complete, patented repair kit that replaces worn automatic transmission shift cable bushings to restore smooth shifting without replacing the entire cable. If your vehicle’s shift lever feels loose, noisy, or intermittently fails to engage gears, a worn shift cable...

This A ABIGAIL 5149062AB oil pressure sensor and specialized 1 1/16" socket kit replaces worn sensors and provides a direct-fit replacement for many Chrysler, Dodge, Jeep and Ram V6/V8 engines. When your vehicle's oil pressure reading is unreliable or the OEM sensor fails, swapping...

Boltigen's 3/8" ID transmission oil cooler hose is a 10-foot, SAE J1532–compliant line engineered for transmission, power steering, and hydraulic fluid routing with 300 PSI working pressure and wide-temperature durability. This transmission cooler hose from Boltigen is crafted for technicians, DIY mechanics, and equipment...

A ABIGAIL 12677836 Oil Pressure Sensor with green socket is a direct-replacement oil pressure switch designed to restore accurate oil-pressure monitoring on compatible GM trucks and cars. This replacement sensor kit includes the pressure switch, a protective filter, and a 1 1/16" socket for...

EVIL ENERGY 3/8" Transmission Oil Cooler Hose is a 5-foot, CPE-built line rated 250psi (1000psi burst) designed to link your transmission and oil cooler with heat- and oil-resistant performance. This hose is engineered for vehicles and equipment that need a reliable, flexible connection for...

EVIL ENERGY 1/2" Transmission Oil Cooler Hose is a 5-foot, CPE-built high-pressure line engineered to connect your transmission and oil cooler reliably at up to 250 PSI. This hose is made to meet SAE J1532 sizing expectations while offering a wide operating temperature window...

COOL STAR 16" 0.75" double-dog (DD) steering shaft — a 3/4" steel replacement shaft engineered to accept standard 3/4" round universal U-joints for hot rods, sand rails, and performance steering builds. This precision-cut 16-inch steering shaft from COOL STAR is designed for builders and...

Bailcast CVS18 Universal Split CV Joint Gaiter Boot Replacement Kit is a ready-to-install repair pack that restores and protects constant velocity joints in front-wheel-drive and light commercial vehicles. If a torn or worn CV boot lets dirt and moisture into your joint, the CV...

The GoldPlug GP13 M12x1.75 is a stainless-steel magnetic engine oil drain plug designed to collect ferrous particles and replace your OEM plug on many Chevy, GMC and Ford engines. The GP13 is engineered to work as a drop-in replacement drain plug for specific modern...

EVIL ENERGY's 3/8" transmission cooler hose is a SAE J1532-rated, 5-foot hose built for transmission, engine, hydraulic oil and power steering cooling applications with a 250 PSI working pressure and robust multi-layer construction. This premium cooler line combines a nitrile (NBR) inner tube, polyester...

NBRINGO 1086-piece SAE O-ring kit is a comprehensive nitrile rubber assortment of 32 dash sizes supplied in a clear, compartmented case for fast, on-the-spot sealing repairs. This kit bundles a wide range of black Nitrile (NBR) O-rings in SAE dash sizes so you can...

NBRINGO's 1540-piece metric O-ring assortment supplies 32 common sizes of nitrile rubber seals, neatly sorted in a clear plastic case and paired with four pick-and-hook tools for fast, accurate repairs. Whether you're maintaining machinery, fixing plumbing, rebuilding pumps, or stocking a toolbox, having the...

The GEAROLL T-0158-HD is a heavy‑duty universal clutch drum spring compressor that safely compresses transmission return springs so you can remove and install snap rings on most clutch drums up to 6". If you work on automatic transmissions for Ford, Chrysler, GM or other...

The A-Premium Automatic Transmission Filter with Pan Gasket is a complete replacement kit designed to trap transmission debris and seal the pan for consistent fluid flow and smoother gear operation. If your vehicle shows symptoms of aging transmission components or it's time for a...

The A-Premium Automatic Transmission Fluid Filter with Pan Gasket is a complete replacement kit that filters debris, seals the transmission pan, and includes the O-ring for a factory-like fluid change. If you service the automatic transmission on Toyota or Lexus models with 4.7L V8...